| Sign In | Join Free | My burrillandco.com | 
 | 
 
                    ... cut: 22V/33V default low voltage restore: 25.2V/50.4V default static current: ≤45mA voltage drop: <270mv wire area max: 10mm² temperature compensation: -3mv/°C/cell Protection:over charge,over discharge,ove...
 
                    ... cut: 22V/33V default low voltage restore: 25.2V/50.4V default static current: ≤45mA voltage drop: <295mv wire area max: 10mm² temperature compensation: -3mv/°C/cell Protection:over charge,over discharge,ove...
 
                    ...Automatic Temperature Compensation • LED ON & OFF selectable • Adjustable alarm delay • Adjustable detection range • using SMD technology, anti-EMI, RFI interference Technical parameters: • Operating voltage...
 
                    ... JS-73D Unique Feature Alarm direction of entry / exit optional Operating Voltage DC9-16V Carton size: Static Current ≤15mA@NC,≤9mA@NO 55 x 35.5 x 29cm Alarm Current ≤9mA@NC,≤18mA@NO Qty /...
 
                    ...Static load measurement Inexpensive Specifications Capacity 3kg 5kg 10kg 20kg Rated output 1.0±20%mV/V Excitation 3-10V Zero balance ±0.1mV/V Nonlinearity ±0.05% R.O. Hysteresis ±0.05% R.O. Nonrepeatability ...
 
                    ...o enjoys a static leak test function. ● It can display product level, water level, temperature, volume, ullage. ● It enjoys a tank tilt compensation function. ● It can display dynamically the change of produ...
 
                    ... differential pressure transmitter with advanced sensor technology. By combining differential pressure with static pressure and temperature compensation on the sensor chip, the STD800 provides extremely high...
 
                    ... techniques. To measure the liquid static pressure which is proportional to the depth of the liquid, and measured by the signal conditioning circuit into RS485 or HART intelligent signal output, to achieve a...
 
                    ...static leak test function. 2, It can display product level, water level, temperature, volume, ullage. 3, It enjoys a tank tilt compensation function. 4, It can display dynamically the change of product level...
 
                    ... that, the hydro static pressure of measured level is proportional to the height of this liquid , adopts the piezoresistive effect of diffused silicon , converts pressure into electrical signal, by temperatu...
 
                    ... analog converter, with built-in automatic compensation and filtering algorithm, which eliminates the error caused by environmental change to a great extent. Convert the change of static gravity field into i...
 
                    ...Static Measurement Introduction: Vg50 is a low-cost attitude measurement equipment, which is suitable for inertial attitude parameter measurement of moving carrier. It adopts MEMS accelerometer and gyroscope...
 
                    ...static friction. It is 1/2-1/4 of the friction of the "0"-shaped rubber ring, which can eliminate the "crawling" phenomenon of low-speed and low-pressure movement. The O-ring is highly wear-resistant and has...
 
                    ...liquid level is proportional to the height of the liquid. It uses the diffusive silicon piezoresistive effect to convert the pressure into an electrical signal. After temperature compensation and linear cali...
 
                    ...static pressure of the liquid level is proportional to the height of the liquid. It uses the diffusive silicon piezoresistive effect to convert the pressure into an electrical signal. After temperature compe...
 
                    ... of the liquid level is proportional to the height of the liquid. It uses the diffusive silicon piezoresistive effect to convert the pressure into an electrical signal. After temperature compensation and lin...
 
                    ...liquid level is proportional to the height of the liquid. It uses the diffusive silicon piezoresistive effect to convert the pressure into an electrical signal. After temperature compensation and linear cali...
 
                    ... that the measured static pressure of the liquid level is proportional to the height of the liquid. It uses the diffusive silicon piezoresistive effect to convert the pressure into an electrical signal. Afte...