Total 20487 products for stepper motor control using microcontroller Manufacture & Suppliers

• 28BYGH Series Nema11 Hybrid Stepper Motor 28mm

  

  ... is, the angle and speed control of stepper motors can be achieved through the number and frequency of pulses input at the signal input terminal of the driver, without feedback signals. However, the stepper ...

  Changzhou Hetai Motor And Electric Appliance Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Geared Stepper Motor Chinese Wholesale Supply Low Noise Permanent Magnet Stepper Motor For Valve 25BYJ412L

  

  ... control, etc. This motor has the characteristics of small size, high precision and high strength. The stepping motor has a built-in reduction gearbox to achieve a reduction ratio of 1:10, improve the torque...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Nema 23 Low Noise Hybrid Stepper Motor 1.8 Degree 4 Leads 6Wire 57mm 7.36V 4.2A

  

  ...Stepper Motor 1.8 Step Angle 4 Leads 6Wire 7.36V 4.2A Hybrid Stepper Motor rotate at fixed angles with digitally controlled electronic pulses and they are able to start, stop and position with good control c...

  Changzhou Hetai Motor And Electric Appliance Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 60BYGH808A 4 Lead Wires High Torque Hybrid Stepper Motor 60mm Nema24 4.5V 26kg.Cm

  

  ... that converts electrical pulses into discrete mechanical motions and has good data control characteristics, the computer becomes an ideal driving source for the stepper motor. With the development of microe...

  Changzhou Hetai Motor And Electric Appliance Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Black Stepper Motor With Encoder NEMA 17 340mN.M 1000pps 4 Phase Stepper Motor

  

  ...Stepper Motor With Encoder NEMA 17 340mN.M 1000pps 4 Phase Stepper Motor Casun Closed Loop Stepper Motor 340mN.M 42x48mm Stepper Motor with NEMA 17 Stepper Motor Controller. This precision stepper motor feat...

  GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 35BYGX200A High Torque Mini Hybrid Stepper Motor Nema 13 4.2OHMS

  

  ... circuit to turn DC power into time-sharing power supply, and multi-phase sequence control current. Use this current to power the stepper motor, so that the stepper motor can work normally. The driver is a t...

  Changzhou Hetai Motor And Electric Appliance Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 35BYJ 12V 4 phase 5 wire variable speed stepper motor permanent magnet stepper motor

  

  ... control and adjustment of water temperature and water flow such as Yuyubao. At the same time, it can realize other fields that require precise control. Due to the realization of open-loop control and low-co...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 0.4A 0.22N.M CNC Machine Stepper Motor 39mm Microstepping Stepper Motor

  

  ... of the controller and motor. Ideal for 3D printers, robots, and modest automation apparatus. Key Features Bipolar or unipolar versions available Hybrid stepper construction Available in single or double sha...

  GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 12V 2-2 Phase Geared Stepper Motor Chinese Wholesale Supply Low Noise Permanent Magnet Stepper Motor

  

  ...stepper motor Chinese wholesale supply low noise permanent magnet stepper motor 35BYJ412P stepper motor is mainly used for sanitary ware. Thermostatic valve Speed hot water faucet Automatic control and adjus...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 9Ohm T-Shape 15mm Stepper Motor Linear Actuator for Precise Positioning

  

  ...Stepper Motor is widely used in aerospace, manufacturing, and other industries, which is designed for accurate and reliable operation. It features M3 screw type, T-shape, 560mA phase current, 9(±10%)Ohm/20C ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 24V Nema 17 Hybrid Stepper Motor , Micro Stepper Motor 1.5kg.cm-7.3kg.cm 25oz.In - 100oz.In

  

  ...Stepper Motor , Micro Stepper Motor 1.5kg.cm-7.3kg.cm 25oz.In - 100oz.In Although the stepper motor has been widely used, the stepper motor is not like an ordinary DC motor, and the AC motor is used conventi...

  CHANGZHOU JKONGMOTOR CO.,LTD

  Jiangsu,China

  Site Member

  Add to cart

  Contact Supplier

• CE 24V Nema 17 Hybrid Stepper Motor , Micro Stepper Motor

  

  ...Stepper Motor , Micro Stepper Motor 1.5kg.cm-7.3kg.cm 25oz.In - 100oz.In Although the stepper motor has been widely used, the stepper motor is not like an ordinary DC motor, and the AC motor is used conventi...

  CHANGZHOU JKONGMOTOR CO.,LTD

  Jiangsu,China

  Site Member

  Add to cart

  Contact Supplier

• Micro Dc Geared Stepper Motor 25PM Linear Motor Valve For Precise Position Control 25BYJ 412L

  

  ...stepper motor valve 25PM linear motor valve for precise position control such as valves 25BYJ412-1L stepper motor is mainly used in the fields of printer, valve, fluid control, position control, etc. This mo...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Performance Micro Stepper Motor Driver Pmdc Motor Controller SWT-256M

  

  ... sinusoidal precision current control technology. The pure sinusoidal precision current control technology adopted by SWT-256M can improve the above problems well, so that the running effect of the stepping ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Dual Shaft 1.8 Degree 4 Phase 1.26N.m DC NEMA 23 Hybrid Stepper Motor CNC Robot

  

  Dual Shaft 1.8 Degree 4 Phase 1.26N.m DC NEMA 23 Hybrid Stepper Motor CNC Robot Complex motion control and automation tasks can be programmed through microcontrollers or other control devices. Suitable for vari...

  GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 25mm Geared Stepper Motor

  

  ...Motor Valve 3.3vDC High Quality Geared stepper motor for Valve Control 25mm mini stepper gear motor 24VDC Geared Stepper Motor diameter 25mm pm Geared Stepper Motor 5V Micro stepping gear motor Description: ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 35mm Geared Stepper Motor 5v 12VDC PM Permanent Magnet Type Easy To Control 35BYJ46

  

  ... and adjustment of water temperature and water flow. At the same time, it can realize other fields that require precise control. Due to the realization of open-loop control and low-cost position control, it ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 25mm PM Linear Motor Valve 3.3vDC High Quality Geared Stepper Motor For Valve Control

  

  ..., the motor has the characteristics of small size, high precision, large intensity and so on. The stepper motor built-in reduction gearbox, to achieve 1:10 reduction ratio, improve the torque, the final use ...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 24mm diameter permanent magnet stepper motor with gearbox, single pole stepper motor, gearbox gear ratio selectable

  

  ...stepper motor with gearbox Single-pole stepper motor 24mm diameter permanent magnet stepper motor with gearbox This motor is mainly used for sanitary ware, thermostatic valve, hot water faucet, water tempera...

  Changzhou Vic-Tech Motor Technology Co., Ltd.

  Jiangsu,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Nema 23 Nema 17 Nema 8 Stepper Motor Driver DM860A 48v Engraving Machine

  

  ...Stepper Motor Driver Stepper Motor Controller 24-80VAC DM860A Advantages: High torque, low heating, low vibration, low cost, We also use high quality chips, with long using life. We have our own driver reser...

  Changzhou Jinsanshi Mechatronics Co., Ltd

  Jiangsu,China

  Active Member

  Add to cart

  Contact Supplier