| Sign In | Join Free | My burrillandco.com |
|
... crystal clear transparency. AR coatings are dielectric nanotechnology and are created by dipping low iron glass into special metal oxide solutions. The glass is then heated to 500 degrees Celsius to create ...
... 95% and the average reflectance is less than 4%. The production principle of this product is to use the most advanced magnetron sputtering coating technology on the surface of ordinary strengthened glass A ...
...Glass / Anti Reflective Glass for Electronic Displays AR glass, or anti-reflective glass, means high-enhanced coated glass or anti-reflective coated glass. Mainly based on nanoporous silica technology, a spe...
... 95% and the average reflectance is less than 4%. The production principle of this product is to use the most advanced magnetron sputtering coating technology on the surface of ordinary strengthened glass A ...
...Reflective Glass AR Glass Single Side Coated Anti Reflection Glass Product Description: AR Glass is coating on the outer surfaces with a thin coating that helps light pass through the glass and not get refle...
...Max dimension 1,600 * 2,800mm Min dimension 200 * 200mm Light Transmittance Visible Light Transmittance >=94% Reflectivity <=5% Application Electronic Display, Museum Showcase, Picture Frame, Lighting, Cold Storage. Anti-Reflective glass(AR) is also called...
.... It is spherical, colorless and transparent when observed under a microscope, with a refractive index of 1.50-1.64. The diameter is generally between 75 microns and 1400 microns. So it is also called reflec...
... on the glass surface, it can enhance the transmissivity of glass from 89% to >=96%, and decrease reflectivity from 8% to <=2%. If four layers AR film coated on double surfaces, the transmissivity can be >=98%, the reflectivity can be <=1%, no reflect and...
...Paint Reflective Glass Beads Hot Melt Reflective Glass Beads Description: Glass beads are used for road markings in the following ways: Retro - reflectivity - When vehicle headlights shine on road markings w...
...Reflective Glass Reflective Glass is suitable for most types of facade glazing in buildings. It is used widely in small/ large areas where reduction of solar heat is required to keep the interiors cool. Its ...
... are designed to enhance the retroreflective properties of road markings, making them more visible at night or in low-light conditions. Here’s a detailed description: Size: The diameter of glass beads typica...
...Reflective Stock Size Glass CTN140 CTN150 5-8mm Solar Reflective Glass CTN140 / CTN150 for Buildings Middle transmittance Description: Solar reflective glass is produced by applying a metallic layer onto the...
...Reflective Stock Size Glass CTN140 CTN150 5-8mm Solar Reflective Glass CTN140 / CTN150 for Buildings Middle transmittance Description: Solar reflective glass is produced by applying a metallic layer onto the...
.... It is spherical, colorless and transparent when observed under a microscope, with a refractive index of 1.50-1.64. The diameter is generally between 75 microns and 1400 microns. So it is also called reflec...
... Glass Beads - These are the most commonly used. They have a relatively uniform size, usually ranging from about 0.4 - 0.85 mm in diameter. Standard glass beads provide good retro - reflectivity and are suit...
...Reflective Glass Beads for Road Marking Improve Safety and Durability Description: Glass beads are used for road markings in the following ways: Retro - reflectivity - When vehicle headlights shine on road m...