| Sign In | Join Free | My burrillandco.com |
|
...Clock Frequency: Max. 66MHz - Operating Voltage: 1.8V(1.7V - 1.95V) - Single Power Supply - Access Time: 5ns - Package: 32-pin TSOP-I Type Product Status Active Memory Type Volatile Memory Format DRAM Techno...
... KB SRAM - Clock, reset and supply management - 12-bit ADC with up to 16 channels - 12-bit DAC with 2 channels - 8-bit advanced-control timers - 10-bit basic timer - Real-time clock (RTC) - CRC calculation u...
...-On/OFF Reset, Power-down/ Wake-up, Clock Management Unit • Timers: 4x 16-bit timers, 1x 8-bit timer • Interrupts: 19 interrupts sources • Serial ......
... 48-LQFP Microcontroller Unit Product Features: - 8-bit core, clocked up to 16 MHz - 8 Kbytes of Flash memory - 512 bytes of RAM - 32 I/O lines - Clock, reset and supply management - Up to three 16-bit timer...
...) and L1 Cache - Operating Voltage Range: 2.0V to 3.6V - On-chip Memories: Up to 256 KB Flash, 64 KB SRAM - Clock, Reset and Supply Management: Internal and External clock sources, PLL, Low-power modes - Int...
... memory • Up to 32 Kbytes of SRAM with HW parity • Up to 4 Kbytes of EEPROM • Clock, reset and supply management • 4 to 32 MHz crystal oscillator • Internal RC 16 MHz and 32 kHz oscillators • 8 to 36 MHz HSI...
...clocks: a low frequency (RTC_XTALI) and a high frequency (XTALI). Specification Of MIMX8DX2AVOFZAC Part Number: MIMX8DX2AVOFZAC Maximum Clock Frequency: 264 MHz, 1.2 GHz L1 Cache Instruction Memory: 16 KB, 4...
...transfer address and read data on both edges of the clock. Specification Of S25FL256SAGNFI000 Part Number S25FL256SAGNFI000 Supply Voltage - Max: 3.6 V Interface Type: SPI Maximum Clock Frequency: 133 MHz Or...
...clock output from this oscillator may be divided by the timer/counter for use as clock input in functions such as LED control, keyboard scanner and similar state machines. Specification Of LCMXO3L-4300E-5MG3...
...clocked from an independent 32kHz internal RC (LSI).Independent of the main clock,it can operate in Stop and Standby modes. Specification Of STM32G0B1RBT6 Part Number STM32G0B1RBT6 Peripherals Brown-out Dete...
...Supply Voltage Range: 1.8 V to 3.6 V Ultra-Low Power Consumption – Active Mode: 220 μA at 1 MHz, 2.2 V – Standby Mode: 0.5 μA – Off Mode (RAM Retention): 0.1 μA Five Power-Saving Modes Ultra-Fast Wake-up Fro...
...carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the reset input independent of clock. Fe...
... at 55 °C after 10 kcycles Data memory: 640 bytes true data EEPROM; endurance 300 kcycles RAM: 1 Kbytes Clock, reset and supply management 2.95 to 5.5 V operating voltage Flexible clock control, 4...
...Supply voltage 24 V DC permissible range +20.4 V to +28.8 V DC Type of voltage DC Rated current 0.9 A Power 15 W UPS connectable (serial) Yes Backup battery Backup battery optional 3.6 V minimum backup durat...
Product Details FEATURES • Clock frequency: 200, 166, 143, 133 MHz • Fully synchronous; all signals referenced to a positive clock edge • Internal bank for hiding row access/precharge • Single 3.3V power supply...
... 1024 x 8 bit (M95080). FEATURES SUMMARY ■ Compatible with SPI Bus Serial Interface (Positive Clock SPI Modes) ■ Single Supply Voltage: – 4.5 to 5.5V for M95xxx – 2.5 to 5.5V for M95xxx-W – 1.8 to 5.5V for M...
... MIPI Data pin Positive 10 GND Ground 11 CLKP Mipi clock signal 12 CLKN Mipi clock signal 13 GND Ground 14 TE TE 15 RESET RESET.PIN 16 GND Ground 17 NC NC 18-19 IOVCC 1.8V Power supply for digital interface ...
... 7 VCC Power setting 8 IOVCC Power supply for digital interface 9 RESET Reset pin 10 GND Ground 11 LEDK LED power cathode 12 LEDA ......
...supply for digital interface 7 GND Ground 8 RESET This signal will reset the device and it must be applied to properly 9 VS Vertical Sync input 10 HS Horizontal Sync input 11 DCLK Pixel clock 12 ENABLK ENABL...
...GND Ground 8 IOvCC Power supply for digital interface 9 GND Ground 10 D1P MIPI Data pin Positive 11 D1N MIPI Data pin Positive 12 GND Ground 13 CLKP Mipi clock signal 14 CLKN Mipi clock signal 15 GND Ground ...