| Sign In | Join Free | My burrillandco.com | 
              
  | 
      
                    ... under certain temperature and humidity conditions. Applicable standards: IEC 61215, IEC 61730-2004, IEC 61345 standards. Thermal cycling test: Photovoltaic modules at a wind speed of not less than 2m ·...
                    ...kind material after anti-corrosion treatment then to test its corrosion resistance.It is ideal for testing the resistance to salt spray corrosion of some products by measuring and comparing similar materials...
                    ... chamber is required by IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1Ed.4CDV 2020 clause 34.3. The hot and cold impact (thermal shock) test chamber is used to test whether the rapid changes in h...
                    ... to EN 50604-1 battery test standard; it simulates GB/T10586-2006 damp heat test chamber technical conditions; GB/T10589-2008 low temperature test chamber technical conditions; GB/T11158-2008 high temperatur...
                    ...led OMNI Valve in Halliburton type. The multi-cycle circulating valve is operated by differential pressure which can offer multi open and closed cycles. Shear pins in the multi- cycle circulating valve hold ...
                    ... of components is not just a goal but an absolute necessity. The HALT HASS & AGREE Vibration Test Chambers, specifically designed to perform the GMW14785 pressure vibration test and meet the GMW14785 PVT Cyc...
                    ...Cycling Water Supply 304SS Climate Test Chamber Temperature Humidity Test Machine Descroption Temperature Humidity Test Machine are available as standard products in a variety of sizes to suit your needs. Ou...
                    ...Testing Machine 18V300AC3000AC Battery Cycle Life Tester Product Description Introduction The battery testing equipment can meet the charging and discharging tests, pulse charging and discharging tests, DCIR...
                    ... Test System Cycle Life Tester CT - 4000 , based on Neware 4th generation testing system , entered into market in 2008 . CT - 4000 supports some testings as follow , EV battery pulse charge / discharge , DCI...
                    ...kind material after anti-corrosion treatment then to test its corrosion resistance.It is ideal for testing the resistance to salt spray corrosion of some products by measuring and comparing similar materials...
                    ...thermal testing, alternating temperature test and constant temperature test,etc in aerospace, aviation, electronics, automobiles, batteries and other industries, and also could do routine tests at high and l...
                    ...durability. Test Standard:BIFMA X5.1 2017 Test Images: Refers to Bifma x5.1 2017 clause 9 Tilt Mechanism Test - Cyclic Test Procedure: 1)The unit shall be cycled for 300,000 cycles at a rate between 10 and 3...
                    420mm X-axis Itinerary Drop Ball-impact Tester for Automatic and Unattended Cycle Test Three-axis automatic falling ball impact testing m... *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, b...
                    ...testing machine UTM with customized force capacity Model: IF2001A Application: Servo Control Tensile Testing Machine) are applies to all kinds of metal, non-metallic materials subjected to tensile, compress...
                    ...testing machine UTM with customized force capacity Model: IF2001A Application: Servo Control Tensile Testing Machine) are applies to all kinds of metal, non-metallic materials subjected to tensile, compress...
                    ... and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. W...
                    Linear Thermal Cycling Chamber Suitable for High Low Temperature Test Model:IE20-1800L Equipment Overview: This series of constant temperature and humidity chambers is suitable for environmental simulation reli...
                    Linear Thermal Cycling Chamber Used for Product Temperature and Humidity Change Test Model:IE20-1800L Equipment Overview: This series of constant temperature and humidity chambers is suitable for environmental ...
                    ...Linear Rapid Rate Cycle Temperature Change Environmental Test Chamber Model:IE20-1800L Equipment Overview: This series of constant temperature and humidity chambers is suitable for environmental simulation r...
                    ...Temperature and Humidity Change Testing Linear Thermal Cycling Chamber Model:IE20-1800L Equipment Overview: This series of constant temperature and humidity chambers is suitable for environmental simulation ...