| Sign In | Join Free | My burrillandco.com |
|
... L Dust and sand. Product Overview This equipment is suitable for testing electrical and electronic products, automobile and motorcycle parts, and seals in sand and dust environments to prevent sand and dust...
...Testing Machine for Safety Compliance Product Information: Standard: IEC60601-1:2012 "Medical electrical equipment - Part 1: Generay requirements for basic safety and essential performance". Sample...
...ir performance in sand and dust environments. The chamber simulates conditions that prevent sand and dust from entering seals and enclosures, testing product durability during use, storage, and transportatio...
...Testing Equipment , Needle - Flame Tester with Ф0.9mm needle-shaped burner Description: This tester is applicable to the research, production and quality inspection departments of lighting, low-voltage elec...
...equipments. Mainly used to evaluate whether equipment can resistivity and storage, running or not in air of dry sand or dust. Sand Dust test chamber provides testing per various standards, like IEC 60529 IP5...
... and sealed in the rain environment whether can ensure the good performance of equipment and components. The scientific design of this equipment, so that the equipment can be realistically simulated dripping...
...IEC60598-1. Application:It is used for the testing of IPX8. Under the device with shell protection grade (IP code) based mainly for electronic and electrical products, outdoor lighting, electric cabinet, com...
...testing machine I. Overview of functions: 1. the equipment conforms to the IP waterproof standard of the electrical components of ISO20653,DIN40050-9 road vehicles. The main purpose is to test the IPX6K wate...
10KV Tracnsformer Testing Equipment 50HZ Dielectric Loss Detector I. Introduction: Dielectric loss test is a effect way to detect the damp degeneration and local defect of electrical equipment insulation, it is...
...Test Equipment 1. Introduction IPX9K High temperature and high pressure jet spray test chamber is designed according to IEC60529, DIN40050-9 figure 7 and ISO20653 figure 8 and 9. “K” is a code special for ve...
... ASTM D3638-92.and etc. Application: It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the ...
...frequency withstand voltage test. It is much smaller, lighter and portable than power frequency withstand voltage tester. It is proved home and abroad that 0.1Hz ultra-low frequency withstand voltage test ca...
...Test Machine Brief Introduction : The tracking erosion test machine is suitable for electrical insulating materials (electric mark index-high voltage), which is used to test electrical and electronic product...
...h the HongCe General Test Bench. Engineered for versatility and precision, this direct-from-factory solution provides a seamless testing experience for global compliance. Designed by the source manufacturer,...
Test Rod Probe C HT-I03 Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Confirm to s...
...Test Equipment , Variable Frequency Test I. Product Description TH9310/20 series withstanding voltage/insulation resistance tester is an economical and intelligent safety tester with the characteristics of s...
... Wheel Rubber Testing Machine , Standard Electric Rolling Wheel Testing Equipment Specifications Three wheel Standard electric rolling wheel testing machine 2.Used to prepare the sample for the peeling stren...
... suction equipment: (ISO10079-1, Sub-Clause 7.5.2) 6.1.3 Container strength: (ISO10079-1, Sub-Clause 6.1.3) 6.3.1 Degree of collapse of Suction tubing: (ISO10079-1, Sub-Clause 6.3.1) Figure A.2 — Test appara...
...defined in Appendix E2 of AS/NZS 4417.2 which are required to be approved before supply or offer to supply in Australia or Non-declared articles- equipment not covered in AS/NZS 4417.2 Appendix E2 and which ...
... the operation of electrical equipment in mineral insulating oil for power equipment. The performance characteristics of 1. The surface of the instrument is treated with electrostatic spray, anti-corrosion a...