| Sign In | Join Free | My burrillandco.com |
|
... numerals 7. Waterproof test simulates the condition of raining, which is mainly applied to electronic products, luminaire, electric components, motor and house-holding appliance. The waterproof test can hel...
IEC60695 45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vert...
... Type Electric drive; DC motor Weight 62kg Volume 55 × 56 × 40 cm(W×D×H) Corresponding test standard SATRA TM93 2. Description: The shoelace and eyelet abrasion is mainly used to measure the frictional prope...
..., rolling on transportation Type Single wing electromagnetic type Weight 150kg Volume 1350×1200×2130 mm(W×D×H) Corresponding test standard CNS 8158 QB/T 2155-2004 2.Product Summary: The drop hammer impact te...
..., motorcycle, electrical products. Confirm to standards: IEC 60529 IPX1, IPX2; EN 60529 IPX1, IPX2; IEC 60598-1; IEC 60335-1 and so on. Test sample: The test apparatus with water proof functions, such as ele...
...Testing Equipment With 200KG,500KG Optional Capacity Uses KJ-1068 is used in the industry of siliceous material,solar energy panel,solar energy material,electric wire and electron.It can be used to test all ...
... of PLC Control Product information: KingPo has designed a series of PLC control with 7 inch touch screen display system test equipment, they are more humanized than the old version ones, and the new version...
.... It provides a realistic water spray simulation condition of electronic products and components. Product Usage Rain chamber is mainly applied to electric and electronic, aerospace, military and other scient...
...data can be read in two kinds of unit (%IACS and MS/m). The products can test electrical conductivity and resistivity at the same time, and they include the intelligent temperature and lift-off compensations...
... Combustion Performance Testing Equipment Applicable standard: GB/T 2407-2008 Plastics combustion performance test methods. Main application: It is suitable for the determination of plastic burning performan...
...Testing Equipment for IEC884-1 Standard Standard: Designed in accordance with the relevant standards of GB2099.1, IEC884-1 and other electrical accessories, it is mainly used to detect the maximum force requ...
...Testing Equipment for IEC884-1 Standard Standard: Designed in accordance with the relevant standards of GB2099.1, IEC884-1 and other electrical accessories, it is mainly used to detect the maximum force requ...
...eddy phase. These products may be used for distinguishing, grading, and state detecting for non-ferromagnetic metal. These are commonly used in industries of machinery,electric power, aviation, aerospace, nu...
...Test Equipment Introduction This instrument is designed and made as per T 0653 Emulsified Asphalt Particles Ionic Charge Test in Chinese industrial standard JTG E20-2011 Specification and Test Methods of Bit...
... for testing the IPX3/IPX4 waterproof level of electrical and electronic products. The complete set of IPX3~4 oscillating tubes test system is composed of one set of oscillating tubes swing device, one set o...
...GB17465.1, GB15092.1, and is used to test the life test equipment of switch products for household and similar uses. And connected to the load box to test the electrical life of plugs and sockets and coupler...
IEC60335 Aluminum Electronic Test Equipment 1.8KG Test Vessel SN1130 Product information: This test vessel conforms to standard requirements of IEC 60335-2-6 clause 21.102, IEC 60335-2-9 clause 21.101. The vess...
... in two kinds of unit (%IACS and MS/m). The products can test electrical conductivity and resistivity at the same time, and they include the intelligent temperature and lift-off compensations, thus can guara...
...Safety – Part 1: General requirements, IEC 60598-1 Article 4.14.3. Application: It is used to test the bending resistance of the power cord of household appliances when it enters the appliance, and to verify...
...electric vehicle charging stations, fully compliant with IEC 61851-1:2017, clause 11.6. It evaluates whether the charging connector and cable assembly can ......