| Sign In | Join Free | My burrillandco.com |
|
... function Vacuum sintering function Ar partial pressure sintering function(Dynamic and static partial pressure) Vacuum cooling function Electrified cooling and thermal insulation function Rapid cooling funct...
... function Ar partial pressure sintering function(Dynamic and static partial pressure) Vacuum cooling function Electrified cooling and thermal insulation function Rapid cooling function(Put a heat exchanger i...
... system voltage: 720V AC ● Test voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal current: Ith=40~60In ● Rated dynamic current: Idyn=2.5Ith ● Rated secondary current: X/5A (X/1A upo...
... system voltage: 720V AC ● Test voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal current: Ith=40~60In ● Rated dynamic current: Idyn=2.5Ith ● Rated secondary current: X/5A (X/1A upo...
... system voltage: 720V AC ● Test voltage: 3kV AC(1min) ● Rated frequency: 50/60Hz ● Rated short-time thermal current: Ith=40~60In ● Rated dynamic current: Idyn=2.5Ith ● Rated secondary current: X/5A (X/1A upo...
..., thus ensuring protection against electric shocks caused by indirect contact. These devices must be used in series with MCBs or fuses to protect them from the potentially damaging thermal and dynamic stress...
..., thus ensuring protection against electric shocks caused by indirect contact. These devices must be used in series with MCBs or fuses to protect them from the potentially damaging thermal and dynamic stress...
... solvents, acids, and bases – Excellent weatherability – Low dielectric constant and low dissipation factor – Excellent insulating properties – Low dynamic coefficient of friction – Non-stick, easy to...
... grades The grade of spring wire used depends on the stress level and the nature of the duty. Where springs are subjected to static stresses or infrequent dynamic loading, a wire grade for static duty (S) sh...
... and ready for connection • Plug-in upper part; upper part can be separated from base without tools • Incl. thermal and dynamic cut-off unit • With visual display of defects • High current conductivity and l...
... allowed Non-metallic sandwich material. 3. No thermal stress concentraition and no damage to the surface coating. 4. High dynamic strength and far superior to the traditional welding. 5. Forming by special ...
... solvents, acids, and bases – Excellent weatherability – Low dielectric constant and low dissipation factor – Excellent insulating properties – Low dynamic coefficient of friction – Non-stick,...
...humidity monitor comprises a pitot tube, thermal resistance, micro pressure difference / absolute pressure sensor group, back blowing unit, and signal control processor. It is an integrated flow rate, dynami...
...Vacuum sintering function Partial pressure sintering function(Dynamic and static) Vacuum cooling function Electrified cooling and thermal insulation function Rapid cooling function(With a heat exchanger insi...
... Bearing Size (mm) 30*72*19 Basic dynamic load rating 58.5 KN Basic static load rating 48 KN Fatigue load limit 6.2 KN Mass (KG ) 0.382 KG 2 . Cylindrical roller bearing Can adapt to the position changes bet...
... Basic dynamic load rating 173 KN Basic static load rating 160 KN Fatigue load limit 21.2 KN Mass (KG ) 1.871 KG 2 . Cylindrical roller bearing Can adapt to the position changes between the shaft and housing...
...*14 Basic dynamic load rating 28.5 KN Basic static load rating 22 KN Fatigue load limit 2.8 KN Mass (KG ) 0.125 KG 2 . Cylindrical roller bearing Can adapt to the position changes between the shaft and housi...
...the control of thermal system are related to the safety and efficiency of rotary kiln operation. The key point of transmission device maintenance is the lubrication of equipment, running state, dynamic detec...
Android Self Payment Kiosk Advertising Display Terminal Stand Interactive Information Product Quick Details: RFID/NFC Readers POS machine QR code Tickets printer Thermal Keyboard metal Dynamic Camera Binocular ...
...Dynamic design characteristics accommodating building movements The combination of taller buildings, faster construction schedules and rising labour costs have lead to the ......