| Sign In | Join Free | My burrillandco.com |
|
... with thickness less than 0.3mm or thin steel plate with thickness less than 0.55mm. It is designed according to GB / T 1732, including a scaled aluminum conduit oxidized by a special process (never rusting ...
... to the surface of combustible substrates under laboratory conditions. Conform to the standard: meet the requirements of GB/T 12441-2005 (Appendix C) test standard. Main parameters: Test station: 1 station. ...
... the box body is in the open fire, Smoke density test chamber can measure the smoke density. This instrument is suitable for E ASTM 662, BS6401, ISO5659, NES 711, NEPA258 and other standards. This test is mo...
... has been designed, principally for testing building materials and composites, but it is capable of testing any sample of size 165mm × 165mm and up to a maximum of 70mm thick. The Apparatus measures the igni...
...Testing Equipment for ISO5657-1986 Combustion Test Scope of application: Mainly applicable to building materials with a thickness of no more than 70mm and a substantially flat surface. Standard: Conforms to ...
...pipe ≥21mm Thickness of metal protective layer ≤1mm Repeated detection accuracy 2% Measuring speed 15~0.5 time/s (reducing with increasing wall thickness) Length of probe cable 5m, 30m (optional) Corrosion d...
...Testing Equipment Smoke Density Test Apparatus Introduction: Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/m2 or 50KW//m2; It is widely used in assess...
... Testing Equipment Use The wear resistance of the material is measured, and the wear resistance of the product is evaluated by an abrasion test, such as measuring mass loss, thickness loss, and light transmi...
...particle is less than 60% of its nominal size or not.Aggregate Testing Equipment. Specification: Slot Size Weight(kg) Dimensions(mm) 4.9 x30 mm 1.5 300x220x80 7.2 x40 mm 1.6 320x240x80 10.2 x 50 ......
... with putty film, and observe whether the putty film has cracks or falls off. The minimum diameter of the curved arc is mm. It is suitable for measuring the flexibility of thick paint putty.Paint Testing Equ...
...: 400kg STANDARD FEATURES Item Specification Internal dimension Diameter 1000* height 1000mm Chamber material SUS#304, thickness 2mm Water depth Simulate 50m depth by air compressor Water pressure Ambient to...
...Testing Equipment Caster and Chair Base Durability Tester Applicability This test applies to pedestal base chairs with casters. The purpose of this test is to evaluate the ability of the chair base and caste...
...Testing Equipment DIN-53516 Din Abrasive Tester for Rubber and Leather Main function of DIN abrasive tester is to test the friction of surface by a particular piece of sandpaper, After friction for a certain...
... time, and then assess the condition of material surface, weight, volume and thickness, from this standard to assess the abrasive nature of materials. Applicable industry Applied to test leather performance ...
...Testing Equipment Introduction: Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 25KW/m2 or 50KW/m2. Smoke Density Test Apparatus is widely used in assessing ...
...is capable of testing any sample of size 165mm x 165mm and up to a maximum of 70mm thick, and measures the ignition characteristics of exposed surfaces of essentially flat materials and specimens. Standards:...
... of dry or wet films. During routine quality control and research and development tests, the coating shall have good consistency and repeatability in covering power, opacity, scrub resistance, sagging resist...
..., which is used to test paper ring pressure strength, cardboard edge pressure strength, corrugated board bonding strength, corrugated board compression strength and so on.Paper mills are usually used to test...
... from test sample when test sample of certain thickness is exposed to heat source(2.5W/cm2, 2KW/m2 using by ASTM E 662 furnace) or fire in a chamber. Using ISO ......
... from test sample when test sample of certain thickness is exposed to heat source(2.5W/cm2, 2KW/m2 using by ASTM E 662 furnace) or fire in a chamber. Using ISO ......