| Sign In | Join Free | My burrillandco.com |
|
... of luggages. The testing methods are as follows: First, Load the object with stated load weight. And then do the test to the specimen with the speed of 30 times per minute and the impact height of 4 inches ...
..., the specimen is subjected to continuous reciprocating stretching and contraction under pneumatic force while being energized, When the current is interrupted or reaches the set number of times, inspect the...
...Test speed range: 6~20 times/min 5. PLC controller and touch screen: 1 set 6. Machine size: W420*H950*D370mm 7. Machine weight: about 40kg 8. Air ......
...electronic dictionaries, etc Technical parameters: 1. Drop mobile phones at the same time: 2 units 2. Allowable specimen weight: 2kg(max) 3. Drop height: 60-200mm 4. Test speed range: 6~20 times/min5, PLC co...
...specimen support of stainless steel. 5.Humboldt Bunsen burner made in USA. 6.Flame height measuring apparatus. 7.Portable burner. 8.Flame attack and burning timing. 9.Dripping waste collector. 10.Chamber tem...
... test Chamber complies with EN 149, GB 2626, GB 19083. The burner ignites the specimen automatically, and ignition time is programmable; after-flame time and afterglow time are timed automatically and shown ...
.... The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. Thi...
... it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion t...
... electric wire or cable. It is used to measure the combustion characteristic of insulation. The burning time can be preset according to the specimen. It is convenient to adjust the flame height. Technical pa...
..., GB31241 and etc . Applications Battery low pressure (high attitude) simulation test, all the testing specimen are being tested under 11.6kPa (1.68psi) .,The low pressure storage status of the sample can be...
...heat, sample in the machine by ultraviolet radiation and temperature effect, after a period of time, observe the degree of yellowing of the specimen, Anti-yellowing aging can be used as a reference to stain ...
... resistance of full unit handle, can be referred to improve product quality. 2.Working principle: The testing method is to load a certain weight on the specimen, impact it for 2500 times by...
...count automatically retentive time of the tape when it is under some load to confirm tape adhesive effect. Temperature in the test chamber can be set, so the specimen can be tested under specified temperatur...
... automatically retentive time of the tape when it is under some load to confirm tape adhesive effect. Temperature in the test chamber can be set, so the specimen can be tested under specified temperature, wh...
... ultraviolet radiation and heat, sample in the machine by ultraviolet radiation and temperature effect, after a period of time, observe the degree of yellowing of the specimen, Anti-yellowing aging can be us...
... and the structure for the suitcases, luggage and travel bags. The method is that loaded a certain weight in the suitcases, luggage or travel bags, the speed of 30 times per minute and the displacement of 4-...
.... 2.Working principle: The LED Touch Screen Suitcase Vibration Impact Testing Machine testing method is to load a certain weight on the specimen, impact it for 2500 times by 30times/minute and 4"...
... Impact Testing Machine testing method is to load a certain weight on the specimen, impact it for 2500 times by 30times/minute and 4" distance. 2.Description: LED Touch Screen Suitcase Vibration Impact Testi...
... to constant internal water pressure at constant temperature. It is applicable to thermoplastic pipes intended for the conveyance of fluids. It is suited to various pipe specimens. Test Standard: ISO1167, AS...
...extreme high temperature and extreme low temperature in a short time continuously to check the chemical and physical change owing to the thermal shrink ager up. It applies for metal, plastic, rubber, electro...