| Sign In | Join Free | My burrillandco.com | 
 | 
 
                    .... Its process design is to dissolve gas into water to the maximum extent under pressure, striving to be in a supersaturated state, and then release air at atmospheric pressure in the flotation tank. The rele...
 
                    .... Its process design is to dissolve gas into water to the maximum extent under pressure, striving to be in a supersaturated state, and then release air at atmospheric pressure in the flotation tank. The rele...
 
                    .... Its process design is to dissolve gas into water to the maximum extent under pressure, striving to be in a supersaturated state, and then release air at atmospheric pressure in the flotation tank. The rele...
 
                    ... processing – excellent resistance to heat(350℃/48h). Product Introduction Mirror-effect resin, powder type, high viscosity of dissolved type....
 
                    ... from liquids by dissolved air flotation. Flotation of the solids is accomplished by the introduction of tinny air bubbles into the process water. As the bubbles rise, they attach themselves to the particale...
 
                    ... from liquids by dissolved air flotation. Flotation of the solids is accomplished by the introduction of tinny air bubbles into the process water. As the bubbles rise, they attach themselves to the particale...
 
                    ... acid and diamine. Polyamide hot melt adhesive is a light yellow granular transparent solid, it is a condensation of dimeric acid and diamine. It is non-toxic, non-irritating, soluble in most solvents, insol...
 
                    ... 10, IEC60884-1: clause 12.3.12 and figure 12 and etc. It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected d...
 
                    BONNIN TA1.0 TA2.0 Online and Offline Total Organic Carbon TOC Analyzer TA-2.0 TOC Analyzer Laboratory Injection Water Online Offline Total Organic Carbon Analyzer TOC Tester Applications: On line monitoring an...
 
                    BONNIN TA1.0 TA2.0 TA-3.0 Online and Offline Total Organic Carbon TOC Analyzer TA-2.0 TOC Analyzer Laboratory Injection Water Online Offline Total Organic Carbon Analyzer TOC Tester Applications: On line monito...
 
                    ...resin has excellent transfer ability, excellent print ability, good solubility, dissolve into 30% solic content Specification DR-70 Appearance Transparent solid Solid content 99%min Acid value 215 Softening ...
 
                    SA-608 Solid Thermoplastic Acrylic Resin Introduction SA-608 solid acrylic resin is designed to produce coatings that protect concrete, metal, and plastic surfaces. When dissolved in an appropriate solvent, SA-...
 
                    Solid Acrylic Resin BP-111 Similar To Paraloid A11 For Silk Screen Printing Inks Solid Acrylic Resin BP-111 1. BP-111 is a copolymer of methacrylate and acrylate. It offers good heat resistance and durability. ...
 
                    Solid Acrylic Resin BA-66 ( Similar to Paraloid B66) It is Solid form of pure acrylic resin. It can be dissolved in ester, ketone and aromatics but insoluble in 200# gasoline and alcohol. Application: 1, Soft p...
 
                    Production Description Solid acrylic resin BA-05 is Solid form of pure acrylic resin. And it is similar to Neocryl B885. It can be dissolved in ester, ketone and aromatics but insoluble in 200# gasoline and alc...
 
                    ...tester 5A 2. Equipment Description: 1. Measurement scope: 0~150Ω (including impedance of current pile) 2. Resolution: .001Ω 3. Measurement error: ± (reading×2%+0.005Ω) 4. Maximum output voltage: AC 400V (45H...
 
                    ...tester 3A 2. Equipment Description: 1. Measurement scope: 0~150Ω (including impedance of current pile) 2. Resolution: .001Ω 3. Measurement error: ± (reading×2%+0.005Ω) 4. Maximum output voltage: AC 400V (45H...
 
                    ...tester 3A 2. Equipment Description: 1. Measurement scope: 0~150Ω (including impedance of current pile) 2. Resolution: .001Ω 3. Measurement error: ± (reading×2%+0.005Ω) 4. Maximum output voltage: AC 400V (45H...
 
                    ...tester 5A 2. Equipment Description: 1. Measurement scope: 0~150Ω (including impedance of current pile) 2. Resolution: .001Ω 3. Measurement error: ± (reading×2%+0.005Ω) 4. Maximum output voltage: AC 400V (45H...
 
                    ...tester 3A 1. Measurement scope: 0~150Ω (including impedance of current pile) 2. Resolution: .001Ω 3. Measurement error: ± (reading×2%+0.005Ω) 4. Maximum output voltage: AC 400V (45Hz, 55Hz, double frequency,...