| Sign In | Join Free | My burrillandco.com |
|
...Test Apparatus For Heating Resistance In Hot Conditions Standards For Coupler Heating Test Apparatus: IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requi...
... to IEC 60884-1: 2022 Annex C alternative gripping tests figure C.2, the reference plug as per C.1 also below shown: Technical Parameters For Plug Gripping Test Apparatus: Item Specifications A reference plu...
... 110, Figure 111 and Table 114. Product overview Samples and restrictions: Electric vehicle AC and DC charging station Test purpose: The flexible cord anchorage of the appliance shall relieve conductors at t...
Offset Misalignment Test Apparatus EV Charging Interface Misalignment Tester Complied Standards & Clauses This test equipment conforms to UL2552-2022, clause 54C.3 and Figure 54C.2, IEC62196-1. Equipment Overvi...
...-2-10, IEC60695-2-11, IEC60695-2-12 IEC60695-2-13. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of glowing component or heat source like overload resi...
...Test Apparatus Product information: It is used for resistance test to torque of cookware handle. The torsion deformation of the handle in all directions does not exceed 10°. The degree of deformation cannot ...
...Resistance Test Apparatus Product information: It is used for testing resistance to pull on cookware handles. When the handle is subjected to horizontal pull, the degree of deformation cannot affect the func...
... 62196-1:2014 clause 17.2. It is used to check the maximum force required when the test plug is withdrawn from the socket-outlet or vehicle connector and the minimum force required when the single-stage pin ...
...Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, ...
...Test Apparatus Product information: The testing system is required by IEC 62368-1:2018 clause Y.5, etc. It is used to verify the protective performance of the enclosure for electronic and electrical products...
...Test Device Applied standard and clauses: This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, et...
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets...
...-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps). To verify adjusting devices...
BS EN 12983-1 Pencil Hardness Test Apparatus For Exterior Organic Coatings Test Scratch Resistance Product overview: The equipment is complied with BS EN 12983-1 clause 8.4.2 ,8.4.3 and Appendix K. The device u...
...Testing Apparatus Product information: This device meets the standards of IEC60884-1 clause28.1.2 figure 40. It is applicable to test improper heating resistance and burning resistance of plug pins and plug ...
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials Product overview: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45...
Insulation Surface Scratch Resistance Test Apparatus For Test Household Appliances IEC 60335-1 Product information The device is used to check abrasion strength of printed circuit boards or the insulating acces...
Needle Flame Test Apparatus For Testing Insulating Material As Per IEC 60695-11-5 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped ......
IEC 60335-2-17 Clause 15.103 Spillage Test Apparatus For Electric Heating Pads Test Applicable Standards: GB4706.19-2008, Clause 15.2 and Figure 101 Household and similar electrical appliances – Safety – Partic...
IEC60695-2-10 Glow Wire Test Apparatus With Computer Control This advanced fire hazard testing equipment simulates thermal stress from glowing components or heat sources like overload resistance. Designed for c...