Total 7981 products for ultrasonic testing probes Manufacture & Suppliers

• Plastic Non Destructive Testing Equipment , ultrasonic thickness tester TG-3300

  

  ...Testing Equipment Plastic Ultrasonic thickness gauge TG-3300 with 0.75mm - 300.0mm measure range Features 1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramic...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Insulating Material Ingress Protection Test Equipment IP1X Test 50mm Rigid Sphere

  

  ... foreign objects from entering. Confirm to standards: IEC 60529 IP1X; EN 60529 IP1X; IEC 61032 Figure 1; IEC60065 and so on. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: ...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60065 Figure 4 Test Rod Probe D Anti - Electric Shock Testing Sphere Diameter SФ35±0.2

  

  ... is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire. Test sample: Easily accessible enclosure live parts or...

  Guangzhou HongCe Equipment Co., Ltd.

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 16mm 40Khz Waterproof Ultrasonic Transducer Ultrasonic Probe Split Transceiver

  

  ...Ultrasonic Probe Split Transceiver Integration Ranging Sensor Probe Waterproof Ultrasonic Transducer Waterproof Ultrasonic TransducerProduct Description Water proof type ultrasonic sensors were widely used f...

  TaiMi(Shenzhen) electronics technology Co.,ltd

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Seamless Tube Ultrasonic Inspection Equipment Rotary Transverse Defects Test

  

  ... steel,copper, aluminium, titanium and different kinds of non- ferrous and ferrous metals Testing model : Eddy current testing + Ultrasonic testing System Introduction This is the combined testing system (ET...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 2 Channels Pile Testing System 150m Probe Crosshole Pile Integrity Tester

  

  ...transmitter, one is receiver. It will test two sonic tubes with one section. This way is much more suitable for the small cast-in-place pile testing work which has two sonic tubes or three sonic tubes. The i...

  Beijing Samyon Instruments Co., Ltd.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• IEC 61032 Figure 16 Test Thorn Probe 14 For Verifying Protection

  

  ... information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 standard requirements. Standard...

  Dongguan Kingpo Technology Limited

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 60335 Test Finger Probe

  

  ... Probe Meets Requirements for Testing Standard(s) including but not limited to:IEC 60950 EN 60950 UL 60950 CSA 950. Hot Tags: iec 60335 test finger probe, China, manufacturers, suppliers, factory, custom, wh...

  Dongguan Kingpo Technology Limited

  China

  Verified Supplier

  Add to cart

  Contact Supplier

• Portable Test Finger Probe 100 Millimeter Length With Handle 50 Mm Sphere

  

  ... probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand. Specification: Diameter of test sp...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Articulated Children Test Finger Probe IEC61032 Figure 12 With Calibration Certification

  

  ...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC 60335, IRAM 4220-1 and in most of the ......

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Tmvsy Coarse Grain Trl Ultrasonic Transducer / Ultrasonic Probes Ndt

  

  TMVSY COARSE GRAIN TRL Ultrasonic Probe,ultrasonic transducer with maker's certificate Features: ��� All probes assemble with lemo 00 connector ��� All probes come with maker certificate ��� Focus depth map requested...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• WATER / GAS / HEAT METER ULTRASONIC TRANSDUCER SPECIAL 1MHZ ULTRASONIC FLOWMETER SENSOR

  

  Ultrasonic transducer water meter gas meter heat meter special 1MHz ultrasonic flowmeter flow sensor Water level liquid ranging probe concentration underwater obstacle avoidance 1MHz2MHz liquid Flow sensor 1. :...

  TaiMi(Shenzhen) electronics technology Co.,ltd

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Portable Universal Hardness Tester Supports UCI and LEEB Testing Methods with LCD

  

  ...ultrasonic hardness testing method and dynamic Leeb hardness testing resolution in one instrument. SU-200 is updated product based on ultrasonic hardness tester SU-100 and Leeb hardness tester SH-500, it has...

  Guangdong Hoyamo Precision Instrument Limited

  Guangdong,China

  Active Member

  Add to cart

  Contact Supplier

• 10 N Force Test Finger Probe Simulate Access To Hazardous Parts For Children

  

  Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This Probe is intended to simulate access to hazardous parts by ...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Unjointed Finger Probe Test Meets IEC61032 Standard Figure 7 Requirements

  

  ... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to verify the protection of persons against access to hazardous...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Calibrated Child Small Test Finger Probe φ8.6mm 18 IEC61032 12 Months Warranty

  

  ... access to hazardous parts by children of more than 36 months and less than 14 years 3. Application range: Accessible enclosure live parts or mechanical parts 4. Parameters Diameter of probe 8.6mm Semi-diame...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC 61851-1 Stainless Steel IPXXD Test Rob Probe D With 3 N Force

  

  ...verify the protection against access with a wire. Technical parameters: Model SN2210-4 SN2210-4T (Optional) Name Test rod probe D Test rod probe D with force Test Wire Diameter Ф1+0.05 0 (mm) Ф1+0.05 0 (mm) ...

  Sinuo Testing Equipment Co. , Limited

  Guangdong,China

  Verified Supplier

  Add to cart

  Contact Supplier

• IEC61032 UL507 Jointed Test Finger , Finger Probe Test B 10N Thruster For IP2X

  

  ...Test Finger / Test Probe B for IP2X with 10N Thruster 1. Introduction: Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN6052...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Accessability Probe Type Short Taper Conical Test Pin Φ3~4-Length 15 IEC61032

  

  ...Test Pin / Conical Test Pin Φ3~4-length 15 / Test Probe 13 Made by Metal and Nylon 1. Introduction: Test probe 13 (conical short taper test pin : Φ3~4-length 15) is designed according to IEC61032 figure 9. T...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Standard Test Finger Probe with 30±0.2 Jointed Point 80±0.2 Length and 180±0.2 Fingertip to Baffle for Accessibility Testing

  

  ...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other products standards. Standard test finger is strictly designe...

  Pego Electronics (Yi Chun) Company Limited

  Jiangxi,China

  Verified Supplier

  Add to cart

  Contact Supplier