Total 15380 products for ultrasonic thickness test Manufacture & Suppliers

• High Precision Digital Thickness Gauge Blocks For Linearity Checking

  

  Blocks for the linearity checking of Digital Thickness Gauge Set (17 pcs) of ultrasonic thickness calibration blocks is intended for checking linearity of ultrasonic contact thickness gauges. High quality of th...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Blocks for the linearity checking of Digital Thickness Gauge Set (17 pcs)

  

  Blocks for the linearity checking of Digital Thickness Gauge Set (17 pcs) Set (17 pcs) of ultrasonic thickness calibration blocks is intended for checking linearity of ultrasonic contact thickness gauges. l Hig...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• HFD-810 Ultrasonic Bond Tester for Waterproof Layer Thickness & Adhesion Testing

  

  HFD-810 Ultrasonic Bond Tester for Waterproof Layer Thickness & Adhesion Testing Features: ��� Key parameters tested for the waterproof layer: thickness and adhesion. ��� Supports full testing procedures; easy to o...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Multi Point Calibration Ultrasonic Hardness Tester With Impact Direction Correction MH660

  

  ..., the hardness of which ranges from very low to very high values. Hardness testing can be performed directly on-site and in any position. Typical applications are large, heavy workpieces which could only be ...

  Mitech CO.,LTD.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• TG3300 metal plastic ceramic thickness gauge

  

  ... damaging the workpiece Measure material thickness from one side without damageHUATEC GROUP CORPORATION Detect wall thinning, corrosion, erosion in pipes, tanks, vessels Verify thickness of metals, plastics,...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• TG3100 Non Destructive Testing Equipment for epoxies , glass Scan mode 0.75 - 300mm

  

  ... Testing Equipment Scan mode 0.75 - 300mm Ultrasonic Thickness Gauge TG3100 for epoxies , glass Features 1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• A7 Calibration Block 74mm radius 75mm thick BS2704:1978 Carbon Steel Ultrasonic Test Block

  

  A7 Calibration Block 74mm radius 75mm thick BS2704:1978 Carbon Steel Ultrasonic Test Block Test Block Checking shear wave probe resolution. Standard BS2704:1978 Steps 2,3,4 and 5mm Material Carbon Steel Specifi...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 1.0mm 4.0mm Ultrasonic Metal Thickness Tester With Rechargeable Li Ion Battery

  

  1.0mm 4.0mm Ultrasonic Metal Thickness Tester With Rechargeable Li Ion Battery Ultrasonic Thickness Gauge With Printer, Rechargeable Li-Ion Battery Function & Feature ��� High stability and precision. ��� Available...

  Chongqing Leeb Instrument Co.,Ltd

  Chongqing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Seamless Tube Ultrasonic Testing Equipment

  

  ...Ultrasonic Testing System Introduction This system is used for Gas Cylinder testing , generally test longitudinal defects , transverse defects and wall thickness of the main gas cylinder tube and both carved...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Carbon Steel Ultrasonic Testing System Gas Cylinder High Pressure

  

  ... ultrasonic testing , Gas Cylinder rotated ,probes move and scan right and left Introduction This system is used for Gas Cylinder testing , generally test longitudinal defects , transverse defects and wall t...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• UT Ultrasonic Testing System Gas Cylinder NDT Inspection Equipment

  

  ... material : Carbon steel ,30CrMo,35CrMo,34CrMo4,37Mn Testing speed : 0-8m/min Introduction This system is used for Gas Cylinder testing , generally test longitudinal defects , transverse defects and wall thi...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• NDT Ultrasonic Testing Equipment

  

  ...Ultrasonic Testing System Introduction This system is used for Gas Cylinder testing , generally test longitudinal defects , transverse defects and wall thickness of the main gas cylinder tube and both carved...

  XIAMEN COBE NDT TECHNOLOGY CO.,LTD

  Fujian,China

  Verified Supplier

  Add to cart

  Contact Supplier

• 350mm Digital Ultrasonic Testing Thickness Measurement Built In Thermal Printer

  

  350mm Digital Ultrasonic Testing Thickness Measurement Built In Thermal Printer Uee Series - Ultrasonic Thickness Gauge Uee933 Functions & Features ��� High quality and precision ��� Built-in thermal printer. ��� wit...

  Beijing Jinshengxin Testing Machine Co., Ltd.

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• CE Steel Cast Iron Aluminum Ultrasonic Metal Thickness Tester

  

  ultrasonic thickness gauge TG-3500 measure the thickness of Steel,Cast iron,Aluminum,Red copper,Brass,Quartz glass etc. 1.FEATURES * Used the exclusive Micro-computer LSI circuit and crystal time base to offer ...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• EMAT Magnetic Creep Magnetic Crawler Corrosion Thickness Measurement Tester TG-M70

  

  ...(PC and software ) set 1 2 HUATEC TG-M70 two-wheel magnetic crawler (Video and Thickness measurement module included) set 1 3 Test control cable meter 25 4 Safety rope drop preventer meter 25 Optional 5 Oper...

  HUATEC GROUP CORPORATION

  Beijing

  Verified Supplier

  Add to cart

  Contact Supplier

• 90° Curved 5 - Step NDT Calibration Blocks Pipe Thikness Test Block Calibration Certificate

  

  Ultrasonic Calibration Block 90° Curved 5-Step Block for thickness and linearity calibration of curved surface Specifications: Calibration blocks is an important supplementary material in the Ultrasonic testing...

  HUATEC GROUP CORPORATION

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Higher Sensitivity Coating Thickness Meter , Long Standby Coating Thickness Gauge MT200

  

  ... Ultrasonic Thickness Gauge with accuracy as high as 0.1/0.01 /mm higher sensitivity Overview The model MT200 is a digital ultrasonic thickness gauge. Based on the same operating principles as SONAR, the MT2...

  Mitech CO.,LTD.

  Beijing,China

  Active Member

  Add to cart

  Contact Supplier

• Thickness Gauge Ultrasonic Transducer suitable olympus 27MG

  

  D790 high Temperature Transducer Ultrasonic thickness gauge equal Olympus probe Please notice that D790 from TMTECK only suitable olympus 27MG, not suitable 45MG. Features: Model Frequency Mhz Crystal Dia(mm) C...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• High Temperature Ultrasonic Transducer Probe GT-12-2 5MHz Frequency For TM281 Thickness Gauge

  

  GT-12-2 High- Temperature Probe Transducer for Ultrasonic Thickness Gauge Model: GT-12-2 Type:High- Temperature Frequency:5MHz Contact Diameter:14mm Measurement Range:4 to 80mm Temperature Range: -20 to 300��� Wh...

  TMTeck Instrument Co., Ltd

  Beijing,China

  Verified Supplier

  Add to cart

  Contact Supplier

• Precision Ultrasonic Cavitation Meter For Testing Ultrasonic Frequency And Intensity

  

  Ultrasonic Cavitation Testing Meter for Testing Ultrasonic Frequency and Intensity Ultrasonic sound pressure meter DBSonics series is occurred in the measurement of ultrasonic cleaning tank of the intensity of ...

  Beijing Cheng-cheng Weiye Ultrasonic Science & Technology Co.,Ltd

  Beijing,China

  Site Member

  Add to cart

  Contact Supplier