| Sign In | Join Free | My burrillandco.com |
|
... the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond surface X. Only the weight of the gauge itself shall be used in the test. C...
...T1 minimum of E40 caps on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond surface ...
...Gauge for Base According to standard IEC 60061-3 Purpose: To check dimension G min. of bases G9. Testing: Without use undue force it shall not be possible for the lamp to enter the gauge in such a way that t...
...gauge for E14 caps on finished lamps, 7006-28B-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of caps E14 on finished lamps. Testing: When the gauge is placed over...
...gauge for caps on finished lamps E12, 7006-27H-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E12 caps on finished lamps. Testing: When the cap on a finished lamp ...
...gauge for caps on finished lamps E12, 7006-28C-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of E12 caps on finished lamps. Testing: When the gauge is placed over...
...shown on sheet 7004-10. Testing: The cap shall be assumed to be correct if can be inserted smoothly into the gauge until the contact places of the cap touch surface Y of the gauge. Company introduction HK LE...
...gauge for caps on finished lamps E17, 7006-28F-1 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of E17 caps on finished lamps. Testing: When the gauge is placed over...
...gauge for caps on finished lamps E17, 7006-27K-1 Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E17 caps on finished lamps. Testing: When the cap on a finished lamp ...
...gauge for caps E26, E26/50x39, E26/51x39 & E26d, 7006-29L-4 Purpose: To check the minimum outside (major) diameter of the screw thread, dimension d, of E26, E26/50x39, E26/51x39 or E26d caps on finished lamp...
... on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall touch surface X. When the lamp is removed from the gauge, at least ...
... with the following requirements: - Surface finish: 0,4 um (see ISO 468 - 1982) - Hardness (after tempering): rockwell cone 55 min. The pitch of the scerew thread of the central ......
...Gauge for Plug 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 546 ( British Standard 546 ) standards. And...
...Gauges 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to UL 498:2012 standards. And the mainly application indu...
...Gauge for Socket-Outlet 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 546 ( British Standard 546 ) stand...
... 1363 standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas. 2. Features: Gauge dimensions, tolerances, material, hardness, surface...
...Gauge for Flat and Round Pin Plugs 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of Australian/New Zealand Standard plugs and sockets confo...
...Gauge 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to AS/NZS 3112 standards. And the mainly application indus...
...Gauges 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to CEI 23-50 standards. And the mainly application indust...
...Gauges 1. Application: This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to BS 1363 standards. And the mainly application industri...