| Sign In | Join Free | My burrillandco.com |
|
1X4 RJ45 8p10c Without LED TAB-Down RJ45 Network Connector Applications: Integrated RJ45 connector main used to : • 10/100/1000M net card,PCMCIA net card,USB Hub,network switch,router,fiber optic transceivers, ...
Single Port RJ45 8p8c With LED TAB-UP RJ45 Network Connector Applications: Integrated RJ45 connector main used to : 10/100/1000M net card,PCMCIA net card,USB Hub,network switch,router,fiber optic transceivers...
The pre-owned R&S FSH3 packs laboratory-grade spectrum analysis into a 2.5 kg field unit that runs up to four hours on battery power. Covering 100 kHz to 3 GHz with 1 kHz1 MHz RBWs, it supports cable fault-loc...
...USB connector, and it is also a USB connector camera, as for this USB, it is a connector which can connect the wires to charge the mobile power or mobile phone. It is a good camera to scan barcodes marking p...
Female Single Port 6P6C RJ11 Jack with black Housing for Net Card , USB Hub RJ11JACK main used to : Net card,PCMCIA net card,USB Hub,network switch,router,fiber optic transceivers,optical transceiver,IP phone, ...
...USB Camera Module 4K RGB Image sensor Wide Angle l Industrial Camera Modules The IMX415 sensor combines ultra-high resolution, advanced features and versatile performance to provide powerful imaging solution...
The pre-owned R&S FPL1007 brings laboratory-grade signal and spectrum analysis to any bench, covering 5 kHz to 7.5 GHz in a portable chassis. An optional 40 MHz acquisition path captures wide-channel WLAN, LTE ...
The pre-owned R&S FS300 delivers dependable spectrum analysis from 9 kHz to 3 GHz in a compact, cost-effective enclosure. Sixteen digitally implemented RBWs down to 200 Hz and a typical 115 dBm noise floor let...
The pre-owned Agilent N9320B delivers essential spectrum analysis from 9 kHz to 3 GHz in a rugged 3-U chassis weighing just 8.4 kg. A 10 Hz minimum RBW and 90 dBc/Hz phase-noise floor resolve closely spaced ca...
The pre-owned R&S FSP13 delivers laboratory-grade spectrum analysis from 9 kHz to 13.6 GHz without the capital outlay or lead time of current-generation hardware. A 1 Hz to 10 MHz RBW suite and -113 dBc/Hz phas...
The pre-owned FSU26 provides laboratory-grade spectrum analysis from 20 Hz to 26.5 GHz, eliminating the need for external mixers in microwave work. A versatile 1 Hz50 MHz RBW set and a 158 dBm noise floor (1...
The pre-owned R&S FSL18 packs laboratory-grade performance into a sub-8 kg chassis, covering 9 kHz to 18 GHz without the cost or complexity of external mixers. A 28 MHz demodulation path captures wide-channel W...
The pre-owned Rohde & Schwarz Spectrum Rider FPH delivers laboratory-class spectrum analysis from 5 kHz up to 26.5 GHz in a rugged 2.5 kg field package. Its 1 Hz3 MHz resolution-bandwidth set, typical 105 dBc...
The pre-owned R&S FPL1003 brings laboratory-grade signal and spectrum analysis to any bench, covering 5 kHz to 3 GHz in a chassis only 23 cm deep. An optional 40 MHz acquisition path and phase noise around 108...
The pre-owned R&S FSP7 delivers lab-grade spectrum analysis from 9 kHz to 7 GHz without the cost or lead-time of new hardware. A 1 Hz10 MHz RBW suite and low phase-noise floor (113 dBc/Hz at 10 kHz) enable cl...
The pre-owned R&S FSL6 brings laboratory-grade spectrum analysis to service benches, production lines and field kits in a sub-8 kg enclosure. Covering 9 kHz to 6 GHz with 28 MHz I/Q bandwidth, it characterises ...
Offered pre-owned and freshly calibrated, the U3751 brings laboratory-class spectrum analysis to the field with 9 kHz-to-8 GHz coverage, a built-in wideband pre-amplifier and an ultra-low 155 dBm/Hz noise floo...
The pre-owned Yokogawa AQ6370B combines a high-performance monochromator with built-in He-Ne referencing to deliver 0.02 nm resolution and 0.02 nm wavelength accuracy across the key 6001700 nm telecom band. A...
USB-A RJ45 Serial Port to RS232 network port USB RS422 to RJ45 8P8C Female Nickel Plated Application: Industrial automation: Connecting machines and controllers over long distances. POS systems: Used in point-o...
...network via an Ethernet cable. The adapter typically has a USB 2.0 port on one end and an RJ45 port on the other end. The USB port is used to provide power to the adapter and to transfer data between the ada...