| Sign In | Join Free | My burrillandco.com |
|
...Vehicle Brake Emission Testing System Product Introduction The KGD - WQ - 510 Motor Vehicle Brake Emission Testing System is a comprehensive solution specifically designed for the standardized testing of mot...
...Vehicle Slow and Fast Charging Electrical Safety Test Equipment Equipment Overview This comprehensive electrical safety testing system for whole electric vehicle includes following test contents: 1. Vehicle ...
...Testing Equipment VOC Emission Test Chamber VOC Release Capsule Of Interiors Product Purpose VOC release capsule of interiors can provide standard testing environment(such as appointed temperature,relative h...
...–Conductive charging of electric vehicle-Part1: General requirements” clause 33.2 and 33.3. Equipment Overview The test equipment is used to check whether a plug or vehicle connector shall have adequate resi...
...-windshield window wiper of motor; Application: The test bench can perform simulated wiper tests for rain, light rain, moderate rain, heavy rain and snow based on the user's test standards. It can not on...
...Emission chamber (Voc emission test chamber,Lab Voc Release chamber,Furniture and automotive voc test equipment) Application of VOC emission chamber The VOC test chamber provides standard testing environment...
...Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage f...
Truck Transport Vehicle Rain Test System Electric Vehicle Testing Equipment System Purpose The test purpose of this test system is mainly the ability of the product to prevent rainwater penetration and the rain...
IEC60754 Wire and Cable Emission of Halogens HFFR Testing Equipment Meets the standards: It conforms to the standards of GB/T17650.1-1998, GB/T17650.2-1998 and IEC60754‐1:1994, IEC60754‐2:1991; it also satisfie...
...Vehicle Charging Plug And Socket Cable Flexing Test Equipment Standard For Electric Vehicle Charging Plug And Socket Cable Flexing Test Equipment: IEC 62196-1:2014 "Plug,socket-outlets,vehicle couplers and v...
...Product information Formaldehyde Tester I Application Formaldehyde mattress mattress tester is mainly applied to formaldehyde, VOC emission test Main parameter Studio dimensions: length × width × height = 1....
... 26.3, figure 19. It is used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle: The free end of the cable and an additional rope o...
... test requirements of .VW 80000-2017,DIN EN ISO 6270-2, GS95011-4-2004, DIN 50017, etc. It simulates the condensation on electronic modules in motor vehicles. It is meant to evaluate the robustness of electr...
...Vehicle Charging Interface Cable Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The flexibility testing apparatus is designed and manufactured ...
... with clause 33 of the IEC 62196-1:2022 standard and etc., and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1-2023 standard. It is a test equipment used to evaluate the resi...
... can guarantee the good working performance and technical status of the equipment and components after or during the raining test. At the same time, the product may be affected by water immersion during tran...
... Product Overview The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle unless it is provided with a cable manag...
... of IEC 61851-1 2017 clause 12.11 and etc. This test equipment is composed of two kinds of impact test apparatuses, and two kinds of mechanical strength test methods can be used to perform impact test on EVS...
... requirements of standards such as IEC 61851-1 2017 Clause 12.11. The test equipment is composed of two kinds of impact test devices. Two kinds of mechanical strength test methods can be used for impact test...
...Test Equipment Product Information For EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment: IEC62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of e...