| Sign In | Join Free | My burrillandco.com |
|
... Test Apparatus measures minimum oxygen concentration as necessary when specimen combustion. The oxygen sensor is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliabilit...
...Test Apparatus (Quartz Tube Method) Summary The working principle:burn the sample in air flow,absorb produced sulfurous acid anhydride with hydrogen peroxide and sulfuric acid,and titrate sulphuric acid with...
... tube and the relevant auxiliary parameters are recorded by the camera to measure the burning rate of combustible gas. The Combustible Gas Burning Rate Test Apparatus is mainly composed of combustion tube, i...
Soil Shrinkage Limit Test Apparatus The Soil Shrinkage Test Apparatus is designed for determining soil contraction properties including moisture content at contracting limit, linear contracting rate, body contr...
ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame Product Description: ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with ...
ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame Summary: ISO75-1 ISO306 HDT VICAT softening point test apparatus for thermoplastic materials with four frame i...
...Test Apparatus Spontaneous Combustion Device Self-heating Point Analyser Applicable Standard GB/T 21756-2008 Chemical products for industrial use – Determination of the relative self-ignition temperature of ...
IEC245-4 Cable Testing Equipment Rubber Electric Wire Abrasion Test Apparatus Product information: This device conforms to the standard requirement of IEC245-4. It is used for the abrasion test of the rubber in...
Reel Test Apparatus Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole Add corresponding mass on wire , Make the wire bear the tension exactly to touch with the ......
...Test Machine Overview Product description This Cold bend test apparatus is used to measure the dynamic bending performance of wire and cable under low temperature conditions, and is suitable for outer diamet...
...test apparatus for swivel connection-Skin or Hair Care Appliance Standard: IEC60335-2-23 clause 11.101 of Household and similar electrical appliances – Safety: Part 2-23: Particular requirements for applianc...
4 Station Flexing Test Apparatus Instrument Introduction 1.1 Main uses This instrument is mainly used to test the flexural fatigue strength of AC power cords and plug leads. It is suitable for rocking motion te...
... and function: The device is used for the standard IEC60745-2-6 Figure 103. Load the electric hammer or electric drill to make it run intermittently, and test the electric hammer or...
...Test apparatus for material for rail train Description ASTM E162 is one most widely used test standard to evaluate the propagation properties of material in USA. The heat resource use gas radiant panel heati...
... for the mechanical strength test of blankets 1. Introduction The blankets mechanical strength test apparatus is designed according to IEC60335-2-17 clause 21.102 and Annex BB.1 to BB.3. It’s used for mechan...
... paths in solid insulating materials, due to the electric stress and electrolytic contamination of the surface. This test is complex and the person performing it should be accurate and maintain good cleanlin...
... ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advan...
... paths in solid insulating materials, due to the electric stress and electrolytic contamination of the surface. This test is complex and the person performing it should be accurate and maintain good cleanlin...
...Test Apparatus ---- Model XP-2 Introduction: XP-2 ASTM D2843 Exit Sign Tester, Exit Sign Test Apparatus is designed and manufactured in accordance with ASTM D2843 standard , it is mainly for building product...
...Test Apparatus For Fire Hazard Testing - Touch Screen Operation Introduction: The best method for testing electrotechnical products with regard to fire hazard is to duplicate exactly the conditions occurring...