| Sign In | Join Free | My burrillandco.com |
|
... RISC architecture and enhanced instruction set - Up to 8 Kbytes of RAM - 32 I/Os with 5V tolerant - 3x 16-bit timer, 1x 8-bit timer, 1x watchdog timer - Up to 14 Low-power modes - Full-speed USB 2.0 device ...
... of EEPROM. The microcontroller also features two 8-bit Timer/Counters, a 16-bit Timer/Counter, a Real Time Clock (RTC), a Watchdog Timer (WDT), a SPI port, and 6-channel 10-bit ADC. The device operates betw...
...EEPROM - Up to 14 communication interfaces - Up to 16 timers/counters - Up to 8 channels of 12-bit ADC - Up to 3 channels of 12-bit DAC - Up to 12 communication interfaces - Up to 8 PWM timers - Up to 4 comp...
... 128 bytes of RAM - Up to 24 I/Os - 8 timers - 8-channel 10-bit ADC - 2 independent Watchdog timers - 2 USARTs - 1 SPI - 2 I2C - Motor control timer - 6-channel DMA - 5-channel low-power comparator - Power-o...
... including an 8-channel 12-bit ADC, four serial communication interfaces (SPI, I2C, USART and LIN), three 16-bit timers, two timer channels, and an integrated real-time clock and calendar (RTC). Additionally...
...10-bit ADC, two UARTs, 16-bit timers, and more. Features: • 16 kB Flash Memory • 4 kB RAM • External Memory Interface • 10-bit ADC • Dual UART • 16-bit Timers • Enhanced Digital I/O • Watchdog Timer • Low Po...
... EEPROM - 1K bytes Internal SRAM - 32 general purpose I/O lines - 6-channel 10-bit A/D converter - 2 USARTs - One 8-bit timer/counter, two 16-bit timer/counters - Programmable watchdog timer - SPI serial por...
... SRAM • 32 Programmable I/O Lines • 16-channel 10-bit ADC • Four 8-bit Timer/Counters, one 16-bit Timer/Counter • Two External and One Internal Interrupt Sources • Programmable Watchdog Timer with On-chip Os...
...Microcontroller 32-UFQFN Product Description Of STM32G081KBU6 STM32G081KBU6 offer two low-power 16-bit timers, two watchdog timers, and a SysTick timer. Specification Of STM32G081KBU6 Part Number STM32G081KB...
... regulator, and an adjustable watchdog timer in a single device. The ADM708ARZ-REEL is perfect for use in battery-powered systems, providing a reset signal to the system microcontroller and a regulated suppl...
MAX6301CSA+T, Low-Voltage, Low-Power, Microprocessor Supervisory Circuits Features: * Operates in 2.7V to 5.5V Supply Voltage Range * Low Quiescent Current: 0.3μA (Typ) * Watchdog Timer With Separate Timeout an...
...microprocessor systems. These include µP reset and backup-battery switchover, watchdog timer, CMOS RAM write protection, and power-failure warning. The MAX690 family significantly improves system reliability...
...microprocessor-based systems. As well as providing power-on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also...
..., ADM708T) 100 μA quiescent current 200 ms reset pulse width Debounced manual reset input (MR) Independent watchdog timer 1.6...
...circuits are suitable for monitoring 5 V power supplies/batteries and microprocessor activity. FEATURES Guaranteed RESET valid with VCC = 1 V 190 μA quiescent current Precision supply voltage monitor 4.65 V ...
... systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection, and power failure warn ing. The complete family provides a variety of configurations to satis...
.../M family of supervisory circuits offers complete single chip solutions for power supply monitoring and battery control functions in microprocessor systems. These functions include µP reset, backup battery s...
... systems. These functions include µP reset, backup battery switchover, watchdog timer, CMOS RAM write protection, and power failure warn ing. The complete family provides a variety of configurations to satis...
...functions in microprocessor systems. These functions include µP reset, backup-battery switchover, watchdog timer, CMOS RAM write protection, and power-failure warning. The family of products provides an upgr...
... to providing power-on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by an external pushbutto...