| Sign In | Join Free | My burrillandco.com |
|
...Testing Equipment for Wheeled Ride-on Toys-Impact Test Purpose: This machine is used to test the dynamic strength performance of toy scooter by such movement that drive the toy three times at a steady speed ...
...Testing machine Product introduction: Chair Seat Combined Tester can load the module must shape, weight on the horizontal seat with a certain value, the frequency of repeated loading, test bench strength, du...
... shock inputs. Shock test data is key information when determining if your product is capable of withstanding its intended distribution and use environment. High Speed Shock Test Systems were developed to ac...
... of luggages. The testing methods are as follows: First, Load the object with stated load weight. And then do the test to the specimen with the speed of 30 times per minute and the impact height of 4 inches ...
... current brake, hysteresis brake, motor, etc.), installation platform, connecting fixture, measurement and control system (instrument, software, etc.), electrical control system, etc. The test process can be...
...Test Bench Measurement And Control System Introduction This type of motor test bench is mainly composed of the motor under test, torque and speed sensor, simulated load (magnetic powder brake, eddy current b...
...Testing Machine Product Description: Battery-packaged stack testing machine is applicable in testing the compression endurance and stacking strength and press standard of corrugated carton. Specifications: M...
...testing machine is mainly applicable to the anti extrusion performance of mining cables below UC-0.66KVT and UCP-1.14KV. 2, Compliant with standard: Meets the requirements of GB12972 test standard. 3, Techni...
...Testing Machine 1. Scope of application: The performance of the servo cable extrusion resistance testing machine is mainly applicable to the extrusion resistance of mining cables below UC-0.66KVT and UCP-1.1...
... naked drop (without packaging) and packaging drop (with packaging). Large packaging is rather heavy and hard to move up, the top surface and sides are less possible to drop, the drop height for test is low,...
... is about 300mm long wire, printed body up on the table fixed to the surface, with white cotton cloth wrapped friction hammer to a certain load, speed and reciprocating stroke, friction printed body to view ...
...Test Stroke 50HZ Tensile Testing Equipment 56X32X180 cm Volume 1, the induction method: high-precision load cell (sensor) 2, capacity selection: 50/100/200 / 500kg 3, unit switching: kgf, N, Lbf 4, effectiv...
... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor bel...
... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor bel...
... / s to strike 50x50mm obstruct. The machine simulation children riding tricycle operation state, put on the load on the sample and use 2 m/s speed to strike a piece of 50 x50mm obstacles block.After testing...
...testing machine/Electornic universal testing machine WDW-H series microcomputer control ring stiffness testing machine adopts mechanical loading, electronic measurement, digital continuous speed regulation, ...
... test bench system is a comprehensive test platform built to meet the needs of engine performance testing. By simulating engine operation at varying loads and speeds, it accurately measures and analyzes perf...
... as requested by the customer. This ensures that the bags are strong enough to handle the load being tested, and can withstand the pressures of the water. With a loadcell capacity of 10-150 tons, these water...
...material specimens when subjected to impact at specific angles and loads. Meet test standards: IZOD: ASTM D256, ISO 180, GB/T 1843. JIS K7110 Features: After the test, the results are automatically displayed...
... when subjected to impact at specific angles and loads. Meet test standards: IZOD: ASTM D256, ISO 180, GB/T 1843. JIS K7110 Features: After the test, the results are automatically displayed and can be saved ...