| Sign In | Join Free | My burrillandco.com |
|
... CO, H₂, O₂, CO₂: Negligible (<1%) H₂S: <10% (Requires filtration) Specification: Sensitivity −450 to −1000 nA/ppm (10 ppm NO₂) T90 Response <60 s (0 → 10 ppm) Baseline (Zero Point) <±0.2 ppm equivalent Resolution <0.02 ppm (RMS noise)...
... Gas: Hydrogen Sulfide (H₂S) Range: 0–2000 ppm Maximum Overload: 4000 ppm (short-term withstandable) Sensitivity: 0.09 ± 0.04 μA/ppm T90 Response Time: ≤ 45 s Baseline (Zero Point): < ±0.4 μA Baseline Drift ...
... Gas Cl₂ Measurement Range: 0 - 20 ppm (ensuring accuracy range) Short-term Overload: Maximum tolerance 50 ppm Sensitivity: -350 ~ -750 nA/ppm (under 10 ppm chlorine gas conditions) Response Time T90: < 60 s...
...Product Model CLE-0013-700 Range 0 to 1000 PPM Load 2000 PPM Sensitivity 0.085 ± 0.025mA/ PPM Baseline (20 oC) < 0.2 A Baseline drift of 0 to 3 PPM (20 to 50 oC) - The resolution is 0.5 PPM Response time (T9...
... Lead (PPM) ≤1mg/kg Mercury(PPM) ≤1mg/kg Arsenic(PPM) ≤1mg/kg Substances not dissolved in water(%) ≤1.0% PH value(%) ≥3.6,≤4.2 Loss on drying ≤0.5% 100mesh through >98% 200mesh through >88% 16mesh through ≥9...
... Lead (PPM) ≤1mg/kg Mercury(PPM) ≤1mg/kg Arsenic(PPM) ≤1mg/kg Substances not dissolved in water(%) ≤1.0% PH value(%) ≥3.5,≤4.2 Loss on drying ≤0.5% 100mesh through >99% 200mesh through >86% 16mesh through ≥9...
... µs/cm <50 <20 Total Harness (CaCO3) ppm <1.0 <0.5 CO2 ppm <5 <2 SiO2 ppm <0.5 <0.2 TOC ppm <0.5 no Heavy ions (Fe, Mn, etc) ppm <0.01 no SDI <0.5 <0.2 Free Cl ppm <0.05 no Temperature ℃ 5-42 10-35 Configuration Ultrafiltration ( UF ) + Reverse...
... µs/cm <50 <20 Total Harness (CaCO3) ppm <1.0 <0.5 CO2 ppm <5 <2 SiO2 ppm <0.5 <0.2 TOC ppm <0.5 no Heavy ions (Fe, Mn, etc) ppm <0.01 no SDI <0.5 <0.2 Free Cl ppm <0.05 no Temperature ℃ 5-42 10-35 Technical data Parameter PLX-500 PLX-100 PLX-200...
... Packaging Palletized, Aluminum bands elements value elements value copper (min %age) 99.99% silica (si/ppm) 0.3 iron (fe/ppm) 2 cobalt (co/ppm) 0.2 sulphur (s/ppm) 4 ars (as/ppm) 0.1 oxygen (o2/ppm) nil bis...
... µs/cm <50 <20 Total Harness (CaCO3) ppm <1.0 <0.5 CO2 ppm <5 <2 SiO2 ppm <0.5 <0.2 TOC ppm <0.5 no Heavy ions (Fe, Mn, etc) ppm <0.01 no SDI <0.5 <0.2 Free Cl ppm <0.05 no Temperature ℃ 5-42 10-35 Technical data Parameter PLX-500 PLX-100 PLX-200...
... µs/cm <50 <20 Total Harness (CaCO3) ppm <1.0 <0.5 CO2 ppm <5 <2 SiO2 ppm <0.5 <0.2 TOC ppm <0.5 no Heavy ions (Fe, Mn, etc) ppm <0.01 no SDI <0.5 <0.2 Free Cl ppm <0.05 no Temperature ℃ 5-42 10-35 Configuration Ultrafiltration ( UF ) + Reverse...
.... It uses a built-in sampling pump for active gas sampling, equipped with an electrochemical sensor supporting dual ranges 0-500 ppm / 0-1000 ppm and resolution 1 ppm. With professional explosion-proof certi...
...ppm ≤ 1 00 30 Ni ppm ≤ 1 00 15 Na ppm ≤ 1 00 27 Cu ppm ≤ 50 2 D10 μm ≥7.000 10.8 D50 μm 1 9.000 ± 2.000 19.5 D90 μm ≤40.000 32.5 Dmax μm ≤55.00 45.4 XRD Lattice Type / / / Ph / 9.50-1 1 . 00 9.8 Moisture ppm...
Phosphoric Acid 80%,Food Grade Phosphoric acid specification Terms Data H3PO4 75%/85% etc Sulfate (as so42-) 50 ppm max Fe 9.5 ppm max Heavy Metal (as Pb) 4.5 ppm max As 0.5 ppm max F 10 ppm max Color 20 apha m...
... Piezoelectric thin-film detection technology. By using PPM-8104, there is no need to change the fuel injection system of engine, it is clamped on the fuel tube. Accurate dynamic pressure can be measured by ...
...PPM-8104 Engine Injection Pressure Measurement Pressure Transducer Description The model PPM-8104 Pressure Transducer was especially designed for engine injection pressure measurement. It adapts Piezoelectri...
... (CO) Gas Sensor Applications: Residential Fire Detection Ventilation Control Technical Specifications: Sensitivity Banding A : 30.0 - 35.9 nA/ppm B : 36.0 - 42.9 nA/ppm C : 43.0 - 50.9 nA/ppm D : 51.0 - 60....
...pin connector. The GS+4DT requires a 0V bias. Its measurement range is 0-1000 ppm for CO and 0-200 ppm for H2S, with outputs of 60 to 120 nA/ppm for CO and 500 to 1100 nA/ppm for H2S. It has a T90 response t...
... Process • Disinfection monitoring Datasheet: Output Signal 1100 ± 300 nA/ppm Resolution (Electronics dependent) < 0.05 ppm T90 Response Time < 60 s Typical Baseline Range (pure air, 20°C) 0.0 ppm to 2.0 ppm...
... calibration including test report Datasheet: Lower Detectable Limit (LDL) ≤ 1 ppm Resolution (16Bit ADC) 0.1 ppm Maximum overload 200 ppm Linear range 100 ppm Temperature Range -40 to 50 °C Humidity Range (...