Latest High Quality GM MDI Multiple Diagnostic Interface with Wifi
his one can only be installed on Win XP Operating System, you can
use USB Cable or Lan Cable to connect it with your laptop
Newest GM MDI features:
1. With opel Global tis global diagnostic system
2. Support offline lease function
3. Support Opel offline programming function
4. With GDS2 diagnostic system
5. Tech2win diagnostic software support adding latest software
6. support programming online
7. support cable communication
8. support wireless communication
9. support original factory latest software
10. With European Chevrolet Global tis, Supports European Chevrolet
offline programming
11. All Chips are new and original
General Motors Global Electrical Architecture (Global A) and Global
Diagnostic Hardware &Software
Global Diagnostic System DGS& Mutiple diagnostic Interface MDI
MDI and GDS Background
MDI is an interface between the vehicle DLC and a PC (by wired USB,
wired Ethernet, wireless Ethernet ) and TIS2web.
Can be Used for SPS programming on existing and future SGM vehicles
Required for diagnostics on new SGM Global A Electrical
Architecture Vehicles
Used with TIS2Web, GM Global Diagnostics System (GDS), SPS and MDI
Manager Software
Allows for GDS diagnostic
GM Multiple Diagnostic Interface (MDI)
All current and most legacy vehicle protocols: UART, KW2000,
CLASS2, GM LAN, etc.
Needed for Global A architechture vehicles
Supports Service Programming System (SPS)
Pass through progrmming on past model and Global A vehicles
Supports PC-Based diagnostics with rollout of the Global Diagnostic
System (GDS) application
Includes Flight Recorder Mode
New Diagnostic Application Software required for Global A Vehicles
Global Diagnostic System (GDS)
PC-based software diagnsotics
DTCs, Diagnostics, Data Display & Visualization, Device Controls,
Special Tests, Flight Recorder management, etc.
GDS is software which runs on a specific PC. Updates received via
TIS2Web.
Multiple display options. More space for diagnsotics. Session
management for multiple us.
Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010
model year. The GM MDI will not support past models when its
diagnostic capabilities are introduced. And, the Tech2 will
continue to be needed to diagnose all vehicles fromprevious model
years. Remote programming with the Tech 2 will continue to be
supported for use on all 2007 and previous vehicles.Additional
information will be supplied in future.
HOW WILL THE GM MDI BE USED?
The new GM MDI can be used only in the Pass-Thru method. This means
you can use it as your programming tool, while your Tech 2/CANDY
remains available for diagnostics and other duties.
The GM MDI is initially being introduced with Pass-Thru programming
capabilities only. It can be used to perform Pass-Thru programming
on all vehicles built since 1996 and will support all vehicles into
the future.
The GM MDI will be required to perform diagnostics on selected NAO
vehicles for model year 2009. Diagnostic software is scheduled to
be released for the GM MDI during the fourth quarter of 2008.
Regulations require programming procedures to be compliant with SAE
Recommended Practice J2534.
The GM SPS is compliant with SAE Recommended Practice J2534, and
the GM MDI is compliant with the portions of SAE J2534 that are
applicable for GM vehicles.
What protocols does the GM MDI support?
For immediate use — At present, vehicles have two buses on the 16
pin connector (high speed and low speed GMLAN). The GM MDI
communicates using all of the existing GM protocols, the same as
the Tech 2:
- UART
- Class 2
- KWP2000
- GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the
only programming method available. (Remote will continue to be
available for previous vehicles.)
GM MDI Package Including:
1pc x GM MDI Main unit
1pc x OBD2 Cable
1pc x USB Cable
1pc x Lan Cable
1pc x AC Adapter
1pc x Screw (used to fix the usb cable when connecting usb cable
with main unit)
1pc x CD Software
Related Pictures:
