Grit 220 Glass Silicon Carbide Sanding Belts / WEEM Abrasives
Quick Detail:
WEEM 1126 wide belts are built with durable Y weight waterproof
polyester backing, close coated sharp silicon carbide gains, and
anti-static treatment.
Description:
Our WEEM 1126 wide belts are early production for panel and board
sanding. It is built with sharp, fast cut silicon carbide gain,
resin over resin, close coated on durable y weight waterproof
polyester backing. In panel and board sanding, usually MDF, HDF and
Particle board, loading problem or clone problems are often
occurred. Anti-static treatment is used on the backing to prevent,
delay loading problem.
Silicon carbide is a very hard and crystal structure produces a
fine straight edged grind lines. It is superior for its ability to
penetrate with light cutting pressures. SiC is primarily used for
grinding nonferrous materials such as brass, copper, bronze, and
wood, glass, rubber and plastics. It is also used to finish
polyurethanes, primers, lacquers and sealers. We chose premium
silicon carbide gains for WEEM 1126.
A closed coat product has a higher number of abrasive cutting
points per square inch and results in higher stock removal rate and
longer time before the abrasive wears out. Normally results in a
better finish.
A strong bi-direction tape splice is used. Joint of WEEM 1128 wide
sanding belts offer 4 types of joints
Tap on gain line joint: 
as default.
Tap on gain zizag joint: 
Tap on butt line joint: 
Tap on butt zizag joint: 
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Specifications:
Backing: | Y weight waterproof polyester |
Treatments: | Anti-static |
Coated: | Close coated |
Bond: | Resin over resin |
Grain: | Silicon Carbide |
Grit: | P36~P220 |
Width: | 1000mm/39” ~ 1380mm/54” |
Length: | Customer specific |
Competitive Advantage:
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma
etc. Maintain economic sanding belts and good performance.
