Cloth Backed Segmented Silicon Carbide Sanding Belts On Wide Panels
Quick Detail:
WEEM R1128 anti-static, sharp silicon carbide, resin over resin;
waterproof polyester segmented wide belts are specifically
developed to maximize life and surface finishes on very wide panels
and boards.
They feature exceptional dimensional stability. Stocked jumbo width
64” (1600mm), when make sanding belt size at 104” x 125” (2650 x
3200mm) only with 2 joints.
Specifications:
Backing: | Z weight polyester; waterproof cloth backing |
Treatments: | Anti-static |
Coated: | Close coated |
Grain: | Silicon Carbide |
Grit: | P40~P220 |
Width: | 1828mm/72” ~ 3300mm/130” |
Length: | Customer specific |
Description:
WEEM R1128 segment belts are designed as sectional belt, or
segmented belt for very wide panels and boards sanding. Therefore
we chose the right backing to sustain cross-direction strength for
exceptional dimensional stability request. We careful chose Z
weight polyester with anti-static treatment for backing. This is a
waterproof cloth backing provided both stiffness strength and
tensile strength, with treatment for oversized dimensional width
stability. All make it an idea backing for sectional belt
requirement. Anti-static treatment made on backing to delay or
prevent loading problem.
Only premium silicon carbide is selected. Silicon carbide is a very
hard and crystal structure produces a fine straight edged grind
lines. It is superior for its ability to penetrate with light
cutting pressures. SiC is primarily used for grinding nonferrous
materials such as brass, copper, bronze, and wood, glass, rubber
and plastics. It is also used to finish polyurethanes, primers,
lacquers and sealers. And use closed coated technique bond on the
backing to ensure the grinding and durable needs. A closed coat
product has a higher number of abrasive cutting points per square
inch and results in higher stock removal rate and longer time
before the abrasive wears out. Normally results in a better finish.
A sectional belt or segmented belt is custom make to your ordered.
For panel industrial, the belt size can be 1950mm x 2800mm or
2950mm x 3200mm etc.
A strong bi-direction tape splice is used. Joint of WEEM R1128
segmented belt offer 2 types of joints
Tap on gain line joint: 
as default.
Tap on butt line joint: 
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Competitive Advantage:
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma
etc. it offer great performance and durable with heavy duty
grinding and sanding needs.
