Automatic Bicycle Braking and Road Performance Testing Machine
With Strollers Testeing Machine
Designed Standard:
EN14764, EN14765 (City and trekking bicycle Part 4, Bicycle for
young children Part 4)
Product Description:
Dynamic road bike running testing machine is suitable to test
bike’s run test& brakes performance test. bike testing machine is
formed by two rollers with varied diameter and follows
specification to install jump plates at bike’s seat post. pedals,
bars, luggage carries, with load set to this tester. Adjust the
distance between front and rear wheel base on the standard for
complete cycles, constantly rotate the wheel is by 7-27km/hr and
the bike is supposed to maintain its normal function, no part
damage or crack is found. For brake test, follow the specification
specified roller’s friction coefficient, wind speed and water-spray
amount of loaded brake & handlebars to test the performance
Main Technical:
| Model | TT-1052DB | TT-1052B | TT-1052D |
| Brake & run test | Brake test | Run test |
| Adjust range between front & rear wheels | mm | 860~1200/(600~1200 optional) / Customer specified |
Counter setting | diameter | 760/(560 optional ) / Customer Specified |
| Jump block amount& combination phase | EN14764 standard | | EN14764 standard |
| power | Servo Motor + reducer + Clutch | AC Reduce Motor+ speed Regulation+ clutch |
| Testing speed(km/hr) | 7-26km/hr(special speed-upon request) |
| Crank Drive Mechanism(optional) | Testing speed(km/hr) | 7-26km/hr(special speed-upon request) |
Counter Weight | Seat Post(Kg) | 36 | Overall Weight 120 |
| Pedals(Kg) | 18 |
| Handlebar(Kg) | 6.75 |
| Luggage Carriers(Kg) | 10.18.25.according to luggage carriers, area 204X240(Assembly Type) |
| Head Tube(Kg) | 14 |
| Force to Brake Handlebars | | ConformEN14764 Standard(Auto weight 40~180N) |
| | | |
Brake Force | Brake Force(N) | 700 ±1 | N/A |
| Resolution | N/A |
| Accuracy | N/A |
| Power | 3;220V;50HZ(3;380V optional) |
| Consumption | KW | 10 | 5 | 8 |
Dimension(WxDxH) |
3030x1200x2900mm (Ref Only) |
| Standard Accessories | Tool Kitx1, Operational Manual in English x1, Testing dead weigh,
Warranty Certificationx1 |
| Condition | Velocity(Km/h) | Brakes in use | Braking distance |
Dry |
25 | both | 7 |
| Real only | 15 |
Quality Guarantee
1) Quality assurance items
The guarantee period is one year
2) The main quality warranty maintenance certificate
If there is any dispute please refer to our guarantee letter, so:
① please keep this guarantee letter, if you lost it, please connect
with us in a month.
② If this guarantee letter has been altered or it has no our stamp,
it is useless.
3) The following conditions need to pay reasonably even in the
assurance period:
① Natural reasons
② Operating mistakes
③ Voltage is not fit for our operation instruction
④ Repack it without our guides
⑤ Damaged for borrowing to others
⑥ Damaged for authorized machine modification
⑦ Damaged for authorized calibration
⑧ Authorized transshipment mistake
⑨ Serve for long distance area
4) Attentions
① Any service in Taiwan or outside Taiwan, transport and travel
fees shall be paid by the customer.
② Any service outside Guangdong, transport and travel fees shall be
paid by the customer.
About Us
Haida products are widely used in paper products, packaging, ink
printing, adhesive tapes, bags, footwear, leather products,
environment, toys, baby products, hardware, electronic products,
plastic products, rubber products and other industries, and are
applicable to all scientific research units, quality inspection
institutions and academic fields. Our products meet UL, ASTM, JIS,
GB,SO, TAPPI, EN, DIN, BS and other domestic and international
standards.
