Automatic Front Feeding table CNC hydraulic Guillotine shearing machine
Features and characteristics,
1. Using computer Auto-CAD design. The machine frame, blades holder and other important parts are analyzed by ANSYS finite element analysis software to ensure the rationality and strength of the frame and structure. The upper blades holder adopts guillotine structure. The rolling guide is supported by three-point type.automatic adjustment of cutting length, nitrogen accumulative return.
2. This Shearing machine is a specially developed model to solve the problems of labor consumption in plate cutting. This model can reduce labor, lift up cutting speed and improve efficiency. It can be completed without foot pedal, and CNC touch screen controller operation. High precision ball screw + sliding guide rail are used to push the plate into shearing, and the shearing accuracy is ± 0.1mm.
3. This Shearing machine is a variable actions machine which is produced in a variety of cutting length and capacity. the main controlling X-axis (cutting length), Cutting angle, Cutting width, and Blades gap/clearance all be controlled by CNC controller DAC310T or DAC360T according to different plates thickness and length.
CNC controller DELEM DAC310T or DAC360T Shear comfort at your fingertips. It improves the shearing effective and shearing quality.
Features of Controller DAC360T
Panel based housing
- Bright LCD screen
- Back / front gauge control
- Retract function
- Cutting angle and gap control
- Stroke length limitation
- Manual movement of all axes
- Force control
- Sheet thickness measurement
- Return to Sender function
- Second and third servo axis (DAC-362T)
- Sheet support
4. Our standard machine is assemblied with normal motor. But now one new high-power servo motor can be applied to our shearing machine. Servo motor is more saving energy and environmental protection and reduce production costs.
Normal motor Servo motor
5. Introducing advanced European technology and adopting integrated hydraulic control system, it has good reliability. more reliable and easy for maintenance.Siemens motors, Hydraulic system uses skin-bag accumulator as auxiliary energy, absorbs pressure impact at the same time, machine tool runs smoothly and has low noise.
6. Equipped lighting-alignment, easy to align when shearing. special for some users who needs measure different sizes in two sides firstly, and then cut down according to the measured line.
7. Professional gate type tool holder structure. Safe fences have been assemblied onto the machine to avoid hands enter the holddown and cutting baldes, and ensure the workers operation safety.
Specifications of Shear QC11K-6x2500,
| Type | QC11K-6x2500 |
| Max. Cutting thickness | 6mm (Mild steel) 3mm (stainless steel) |
| Max. Cutting width | 2500mm |
| Strokes | 9-35/min |
| Max. Front-gauge stroke | 6000mm |
| Shear angle | 0.5-2.0Degree |
| Depth of throat | 100mm |
| Height of working table | 700mm |
| Width of working table | 500mm |
| Main motor power | 7.5kw |
| Servo motor of front-gauge power | 1.5kw |
| Oil pump | 25L/min |
| Dimensions of Shear: | 3250x1700x2050 |
| Size of front feeding table | 7500x2500x700 |
| Net weight Appro. | (4.2+5.0)Tons |
| Volt. | 380V,50HZ |
Standard configures,
| Optional model | Manufacturer | Remarks |
| CNC system | DAC310T
DAC360T | DELEM | |
| Hydraulic system | Main solenoid valves | Rexroth FIRST | |
| Front gauge | Servo motor Ball screw + Linear guider | ESTUN TAIWAN | |
| Oil pump | Inner Gear oil pump | Allead | |
| Main power | Normal motor, Servo motor (Optional) | China VEICHI | |
| Front work table | Big pallet and ball rack | PSL | |
| Security measures | Front steel fences protection Back safe sensor protection (Optional) | PSL | |
| Back supporting device | No | NO | |
| Blade clearance | Motorized adjustment by
CNC controller operating | PSL | |
| Electric parts | Schneider Relay,Contactor | Schneider | |
| Foot switch | No | No | |
| Deep throat | 100mm | | |
QC11K series main specifications,
| Model | Max. Tkn. | Yield strength | Max. Length | Angle | X.Stroke | Power | L*W*H(mm) | Weight |
| QC11K-6*2500 | 6mm | ≤450kN/cm | 2500mm | 0.5-2.5° | 750mm | 7.5kW | 3140*1740*2040 | 4800Kg |
| QC11K-6*3200 | 6mm | ≤450kN/cm | 3200mm | 0.5-2.5° | 750mm | 7.5KW | 3750*1770*2150 | 5800Kg |
| QC11K-6*4000 | 6mm | ≤450kN/cm | 4000mm | 0.5-2.5° | 750mm | 11KW | 4830*1840*2150 | 7500Kg |
| QC11K-6*5000 | 6mm | ≤450kN/cm | 5000mm | 0.5-2.5° | 750mm | 15KW | 5830*1840*2150 | 13000Kg |
| QC11K-6*6000 | 6mm | ≤450kN/cm | 6000mm | 0.5-3° | 750mm | 15KW | 6480*2100*2300 | 18000Kg |
| QC11K-8*2500 | 8mm | ≤450kN/cm | 2500mm | 0.5-2.5° | 750mm | 11KW | 3040*1700*1700 | 5500Kg |
| QC11K-8*3200 | 8mm | ≤450kN/cm | 3200mm | 0.5-2.5° | 750mm | 11KW | 3860*1700*1700 | 6200Kg |
| QC11K-8*4000 | 8mm | ≤450kN/cm | 4000mm | 0.5-2.5° | 750mm | 11KW | 4640*1700*1700 | 7900Kg |
| QC11K-8*5000 | 8mm | ≤450kN/cm | 5000mm | 0.5~3° | 750mm | 18.5KW | 5400*2400*2000 | 13500Kg |
| QC11K-8*6000 | 8mm | ≤450kN/cm | 6000mm | 0.5~3° | 750mm | 22KW | 6480*2100*2350 | 19000Kg |
| QC11K-8*8000 | 8mm | ≤450kN/cm | 8000mm | 0.5~3° | 750mm | 22KW | 8580*2130*2350 | 29500Kg |
| QC11K-10*2500 | 10mm | ≤450kN/cm | 2500mm | 0.5-2.5° | 950mm | 15KW | 3040*1800*1700 | 6500Kg |
| QC11K-10*3200 | 10mm | ≤450kN/cm | 3200mm | 0.5-2.5° | 950mm | 11KW | 3850*1830*1900 | 7500Kg |
| QC11K-10*4000 | 10mm | ≤450kN/cm | 4000mm | 0.5-2.5° | 950mm | 15KW | 4650*2100*2000 | 11000Kg |
| QC11K-10*5000 | 10mm | ≤450kN/cm | 5000mm | 0.5~3° | 950mm | 15KW | 5750*2100*2000 | 16000Kg |
| QC11K-10*6000 | 10mm | ≤450kN/cm | 6000mm | 0.5~3° | 950mm | 15KW | 6500*2100*2300 | 24000Kg |
| QC11K-10*8000 | 10mm | ≤450kN/cm | 8000mm | 0.5~3° | 950mm | 15KW | 6800*2100*2300 | 32000Kg |
| QC11K-13*2500 | 13mm | ≤450kN/cm | 2500mm | 0.5-2.5° | 1000mm | 15KW | 3285*1830*2390 | 7500Kg |
| QC11K-13*3200 | 13mm | ≤450kN/cm | 3200mm | 0.5-2.5° | 1000mm | 15KW | 3855*1830*2390 | 9500Kg |
| QC11K-13*4000 | 13mm | ≤450kN/cm | 4000mm | 0.5-2.5° | 1000mm | 18.5KW | 4850*1830*2390 | 12500Kg |
| QC11K-13*6000 | 13mm | ≤450kN/cm | 6000mm | 0.5~3° | 1000mm | 30KW | 6850*1930*2650 | 30000Kg |
| QC11K-13*8000 | 13mm | ≤450kN/cm | 8000mm | 0.5~3° | 1000mm | 30KW | 8950*2130*2850 | 46000Kg |
| QC11K-13*9000 | 13mm | ≤450kN/cm | 9000mm | 0.5~3° | 1000mm | 45KW | 9980*2130*2850 | 65000Kg |
| QC11K-13*10000 | 13mm | ≤450kN/cm | 10000mm | 0.5~3° | 1000mm | 45KW | 11050*2500*3100 | 85000Kg |
| QC11K-16*2500 | 16mm | ≤450kN/cm | 2500mm | 0.5~3° | 1000mm | 22KW | 3440*1940*2830 | 9500Kg |
| QC11K-16*3200 | 16mm | ≤450kN/cm | 3200mm | 0.5~3° | 1000mm | 22KW | 4010*1940*2830 | 11000Kg |
| QC11K-16*4000 | 16mm | ≤450kN/cm | 4000mm | 0.5~3° | 1000mm | 30KW | 5010*1980*2830 | 15500Kg |
| QC11K-16*5000 | 16mm | ≤450kN/cm | 5000mm | 0.5~3.5° | 1000mm | 30KW | 5900*2600*2830 | 25000Kg |
| QC11K-16*6000 | 16mm | ≤450kN/cm | 6000mm | 1~3.5° | 1000mm | 37KW | 6900*2600*2830 | 36000Kg |
| QC11K-16*8000 | 16mm | ≤450kN/cm | 8000mm | 1~3.5° | 1000mm | 45KW | 8900*2900*3430 | 75000Kg |
| QC11K-20*2500 | 20mm | ≤450kN/cm | 2500mm | 1~3° | 1000mm | 30KW | 3440*1980*2830 | 14000Kg |
| QC11K-20*3200 | 20mm | ≤450kN/cm | 3200mm | 1~3° | 1000mm | 30KW | 4010*1900*2830 | 17000Kg |
| QC11K-20*4000 | 20mm | ≤450kN/cm | 4000mm | 1~3.5° | 1000mm | 37KW | 4850*2600*2900 | 22000Kg |
| QC11K-20*6000 | 20mm | ≤450kN/cm | 6000mm | 1~3.5° | 1000mm | 55KW | 6700*3000*3000 | 54000Kg |
| QC11K-30*2500 | 30mm | ≤450kN/cm | 2500mm | 1~3.5° | 1000mm | 45KW | 3440*1900*2830 | 25000Kg |
| QC11K-30*3200 | 30mm | ≤450kN/cm | 3200mm | 1~3.5° | 1000mm | 45KW | 4200*1900*3000 | 34000Kg |
Remarks: If these parameters are not updated or changed in time, please understand and contact with us by Chat online or email. THANKS.
