50MHz MCU Microcontroller Unit SMD Mounting Type C8051F126-GQR C8051F12x

C8051F126-GQR C8051F12x Microcontroller IC 8-Bit 50MHz 128KB (128K x 8) FLASH 100-TQFP

Analog Peripherals - 10 or 12-bit SAR ADC • ± 1 LSB INL • Programmable throughput up to 100 ksps • Up to 8 external inputs; programmable as singleended or differential • Programmable amplifier gain: 16, 8, 4, 2, 1, 0.5 • Data-dependent windowed interrupt generator • Built-in temperature sensor - 8-bit SAR ADC (‘F12x Only) • Programmable throughput up to 500 ksps • 8 external inputs (single-ended or differential) • Programmable amplifier gain: 4, 2, 1, 0.5 - Two 12-bit DACs (‘F12x Only) • Can synchronize outputs to timers for jitter-free waveform generation - Two Analog Comparators - Voltage Reference - VDD Monitor/Brown-Out Detector On-Chip JTAG Debug & Boundary Scan - On-chip debug circuitry facilitates full-speed, nonintrusive in-circuit/in-system debugging - Provides breakpoints, single-stepping, watchpoints, stack monitor; inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - IEEE1149.1 compliant boundary scan - Complete development kit 100-Pin TQFP or 64-Pin TQFP Packaging - Temperature Range: –40 to +85 °C - RoHS Available

High Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instruction set in 1 or 2 system clocks - 100 MIPS or 50 MIPS throughput with on-chip PLL - 2-cycle 16 x 16 MAC engine (C8051F120/1/2/3 and C8051F130/1/2/3 only) Memory - 8448 bytes internal data RAM (8 k + 256) - 128 or 64 kB Banked Flash; in-system programmable in 1024-byte sectors - External 64 kB data memory interface (programmable multiplexed or non-multiplexed modes) Digital Peripherals - 8 byte-wide port I/O (100TQFP); 5 V tolerant - 4 Byte-wide port I/O (64TQFP); 5 V tolerant - Hardware SMBus™ (I2C™ Compatible), SPI™, and two UART serial ports available concurrently - Programmable 16-bit counter/timer array with 6 capture/compare modules - 5 general purpose 16-bit counter/timers - Dedicated watchdog timer; bi-directional reset pin Clock Sources - Internal precision oscillator: 24.5 MHz - Flexible PLL technology - External Oscillator: Crystal, RC, C, or clock Voltage Supples - Range: 2.7–3.6 V (50 MIPS) 3.0–3.6 V (100 MIPS) - Power saving sleep and shutdown modes

Koben Electronics was founded in 1995 and is located in the Silicon Valley of China, Shenzhen. 

The mission of Koben has always been to provide quality electronics components to manufacturers worldwide. Early on we became a primary conduit for end-of-program and overstock inventory for major distributors such as Future Electronics and contract manufacturers as Flextronics. Koben has since then added sourcing of high quality components from local manufacturers in China.

Koben has always been customer driven rather than opportunity driven. Meaning- we will always choose path that is best for long term relationship with customer over short term view. It is why we have one of the highest customer retention scores of China based distributors.