Office Sliding Room Dividers Movable Sound Proof Partition Wall
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Specification:
Our operable or movable walls are the quality option for Maximilian
the use of space within offices, educational establishments and
hotels.
Using a system of individual interlocking panels that once in place
give the same quality, aesthetics and sound reduction as a
permanent partition wall they are the ideal solution for use in
larger areas such as conference and meeting rooms where the space
is used for a diverse range of activities.
Each panel within a movable wall system can be stored away
completely when not in use to maximize the available floor space.
Additionally there are numerous ways of stacking or configuring the
individual acoustic wall panels to give full versatility on how the
area is used.
Application:
Whilst widely used within hotel banqueting suites and conference
centers with large muti-functional spaces they are also ideally
suited for use within offices to give added flexibility to meeting,
training and conference rooms.
The individual panels can be easily operated by handle because they
are ceiling hung there is no potential obstruction from floor track
to worry about giving maximum flexibility on how the space is used.
Structure details:
The Steel panels are manufactured of acoustical substrate pressure
laminated to both sides of steel framing members. The finish
material can be wrapped around the vertical edges of the panel to
create a seamless appearance between adjacent panels (standard) or
the vertical edge can be completely encapsulated and protected by a
decorative aluminum trim (optional). For added durability, an
optional steel skin can be laminated on top of the substrate
material.
The panels are available with standard acoustical substrate or
optional steel skins for added durability.
Standard brimless vertical astral provide a positive interlock with
adjacent panels that prevent sound leaks while producing a minimal
seamless appearance at the panel face.
Accessories:
Track: The tracks are made from extruded 6063 - T5 anodized
aluminium. The track housing shall utilize grooves and interlocking
steel pins for positive alignment of adjacent track sections, and
shall be reinforced overhead by drop rod brackets. Aluminum track
housing shall include an integral nut slot to accept a hardened
square nut for attaching each drop rod bracket to the top of the
track.
Panels:The Panels will be made from 12mm MDF boards and shall be
100mm thick and 1230mm maximum width, made to the appropriate
acoustic rating and structural backing and mounted in full
perimeter extruded aluminium frames with interlocking corner
construction .The panel faces shall be finished with selected
material.
Panel Surface Finish:The panel surface will be as per the clients
requirement finished either in Sliwal factory – China or by others
. The normal finish such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom
and as well as closure seals for the operable wall
system.Retractable seal drop will be 23mm.
Operation:
Usually, the last side of each group of screens is a retractable
screen. Push the screen to the position where it should be placed.
Then move the handle up and down inside the side material groove to
pop up and down the active seal. Show the position, and then put
the handle in the operation hole on the surface of the expansion
screen , and turn it counterclockwise until the side of the
telescopic aluminum plate is pressed against the wall.
Push the door in the door to the position where it should be placed
and the screen in front is tight. Insert the handle into the groove
on the side of the screen , and pull the handle upwards to open the
air-seal seal screen on the inside of the screen to fix the screen.
Open the small door, insert the handle into the operation hole of
the door leg on the other side of the screen, and pull the handle
upwards to open the expansion screen on the other side of the
screen to fix the screen.
