Product Introduction
The impeller has a double-sided blade with backward tilting, which
can realize double circulation of slurry in the tank; the gap
between the impeller and the cover plate is large, and the air
intake is large; the circumferential speed of the impeller is low,
and the life of the wearing parts is long; the forward inclined
groove body has a small dead angle , foam movement speed; large
inspiratory capacity, low energy consumption; long life of wearing
parts; conducive to coarse-grain mineral flotation; mechanical
agitation, self-priming, self-priming slurry.
Working principle
The working principle of the SF flotation separator, when the impeller rotates, the slurry in the upper and lower
impeller chambers generates centrifugal force under the action of
the upper and lower blades and is twisted to the periphery, so that
a negative pressure zone is formed in the upper and lower impeller
chambers. At the same time, the slurry in the upper part of the
cover plate is sucked into the upper impeller cavity through the
circulation hole on the cover plate to form a slurry circulation.
When the lower blade pulls out the slurry around, the lower slurry
is replenished to the center, thus forming a lower circulation of
the slurry. The air is sucked into the upper impeller chamber
through the suction pipe and the central cylinder, and is mixed
with the sucked slurry to form a large number of fine bubbles,
which are uniformly dispersed in the groove through the cover plate
to form mineralized bubbles. The mineralized bubbles float up to
the foam layer and are scraped off by the scraper to form a foam
product.
Application
Application: Metal ore such as gold, silver, copper, Lead (Pb), Zinc (Zn), Tin,
Nickel (Ni) and so on, non-metal mineral, raw body and materials of
chemical industry.
Features
♦ Large air-absorption capacity and low energy consumption
♦ Forward inclined double impellers equipped with honeycomb duct and
dummy bottom.
♦ Air and slurry are naturally sucked without need for foam pump.
♦ Process is easy to be changed.
♦ Can compose a joint flotation unit with SF flotation cell.
Techinical parameters
| Model | Volume (m3) | Cell size (mm) | Impeller Dia. (mm) | Impeller speed (r/min) | Capacity (m3/min) | Power (kw) | Singe cell weight (kg) |
| XJ-3 | 0.35 | 700× 700× 700 | 300 | 483 | 0.18-0.4 | 2.2/0.55 | 430 |
| XJ-6 | 0.62 | 820× 900× 850 | 350 | 400 | 0.3-0.9 | 3/1.1 | 755 |
| XJ-11 | 1.1 | 1100× 1100× 1000 | 500 | 330 | 0.6-1.6 | 5.5/1.1 | 1416 |
| XJ-28 | 2.8 | 1750× 1600× 1100 | 600 | 280 | 1.5-3.5 | 11/1.1 | 2113 |
| XJ-58 | 5.8 | 2200× 2200× 1200 | 750 | 240 | 3--7 | 22/1.5 | 3400 |
| SF-0.37 | 0.37 | 700× 700× 750 | 296 | 386 | 0.2-0.4 | 1.5/0.55 | 468 |
| SF-0.7 | 0.7 | 820× 900× 950 | 350 | 400 | 0.3-0.9 | 3/1.1 | 805 |
| SF-1.2 | 1.2 | 1100× 1100× 1100 | 450 | 312 | 0.6-1.2 | 5.5/1.1 | 1373 |
| SF-2.8 | 2.8 | 1700× 1600× 1150 | 550 | 268 | 1.5-3.5 | 11/1.5 | 2138 |
| SF-4 | 4 | 1850× 2050× 1200 | 650 | 220 | 2--4 | 15/1.5 | 2582 |
| SF-8 | 8 | 2200× 2900× 1400 | 760 | 191 | 4--8 | 30/1.5 | 4129 |
| SF-10 | 10 | 2200× 2900× 1700 | 760 | 191 | 5--10 | 30/1.5 | 4486 |
| SF-16 | 16 | 2850× 3800× 1700 | 760 | 191 | 5--16 | 30× 2/1.5 | 8320 |
| SF-20 | 20 | 2850× 3800× 2000 | 760 | 191 | 5--20 | 30× 2/1.5 | 9828 |
Working Sites
You May Also Like
Ball Mill Jaw Crusher Hammer Crusher
2-Roller Crusher Cone Crusher Impact Crusher
Company Profile
- Henan Ascend Machinery & Equipment Co., Ltd. was established in
2005 and it is located in the high-tech zone of Zhengzhou City,
Henan Province. As a technology driven mining equipment company, it
is committed to the R&D, production, sales and after-sales
service of mining machinery and equipment.
- The company's main products are crushers, grinding mill equipment,
mineral beneficiation equipment, rotary dryer and crusher &
grinding mill spare parts. In addition to the Chinese domestic
market, Ascend machinery expands its business in more than 160
countries and regions.
- Focused on product quality and after-sales service, Ascend has won
widespread praise and trust of international customers. We have a
professional engineer team responsible for the pre-sales technical
consultation, technical solutions in the process of sales,
installation, commissioning and after-sales service to ensure that
customers can purchase and use equipment with peace of mind.
FAQ
Q1. Are you factory or trading company?
We are factory specialized in manufacturing stone crushers,
grinding mills, beneficiation equipments and other mining
equipments. Our office and factories are based in Zhengzhou, China.
Because we are factory, so we can guarantee the machine quality and
we can give you very competitive factory price without extra agent
cost.
Q2. To which country your products have been exported before?
In Africa, We have exported to Sudan, Kenya, Zambia, Ethiopia,
Zimbabwe, Guinea, Nigeria and so on. We also exported South Africa,
Chile, Peru, Ecuador, New Zealand, America, Austrilia more than 160
countries. Our equipment and service have won very high reputation
in these countries.
Q3. How will you help the customer install the equipment?
We will send our senior engineer to your place to guide the
installation and commissioning.
Q4. How about the wear parts supply?
We offer wear parts to our customer with our most favorable price.
If there are problems you could not handle, we will send our
technicians to your place.
Q5.What about the payment method?
T/T, Paypal, Western Union, L/C is available
Q6.What about after-sale service?
12 months warranty for all kinds of products; and you will get our
7*24h online service.
Contact Us
