Plug Socket Test Equipment Tumbling For Barrel Testing Machine
Standard:
IEC 60884-1 2013 ‘Plugs and socket-outlets for household and
similar purposes -- Part 1: General requirements’ clause 24.2.
Standard description:
The specimens are individually subjected to the test Ec:Rough
handling shocks, primarily for equipment-type specimens, procedure
2 of IEC 60068-2-31, the number of falls being
– 1 000 if the mass of the specimen without flexible cable does not
exceed 100 g,
– 500 if the mass of the specimen without flexible cable exceeds
100 g, but does not exceed
200 g, and
– 100 if the mass of the specimen without flexible cable exceeds
200 g.
The barrel is turned at a rate of five revolutions per minute, 10
falls per minute thus taking place.
Application:
This device is suitable for test the drop resistance of plugs and
socket-outlets, surface type mounting boxes, screw glands, gland
covers, switch and other electrical accessories.Plug Socket Test Equipment.
Test sample:
plugs and socket-outlets, surface type mounting boxes, screw
glands, gland covers, switch and other electrical accessories.Plug Socket Test Equipment.
Feature:
This tester can preset test times, automatic stop when set test
times completed.
Parameters:
| Model | HC9922 |
| Rotate speed | 5rpm |
| Drop rate | 10 time per min |
| Material | Sideways 1.5mm high-quality steel plate, upper and lower for 3mm
steel pad in the 10-19mm wood and oblique part slide surface is
plastic laminate, with triangle rubber pad |
| Test times | 0~9999 |
| Drop height | 500mm (1000mm for option) |
| Barrel number | Single or double |
| Application | Plug and socket and similar electrical accessories |
| Standards | IEC60884-1, IEC 60068-2-31 |
| Power supply | 220V 50Hz |
