Ceramic Component Helium Detection System 1*10-8 Pa·m3/s
Ceramic Component Helium Detection System 1*10-8 Pa·m3/s Leak Rate
Introduction of Ceramic Component Helium Detection System:
The ceramic component leak detection system uses a touch screen and
button switches for display and control. The workpiece is manually
placed, and one product is tested at a time. Different
specifications of products are tested by changing the leak
detection fixture. During system leak detection, the workpiece to
be inspected is manually placed on the leak detection fixture,
which is connected to the leak detector through the leak detection
switching valve. After the workpiece security positioning, the
cylinder descends and pushes the helium nozzle to compress the
workpiece. Then start the auxiliary pump and start vacuuming the
interior of the workpiece. Then the leak detector continues to
evacuate and clear the background. When the leak detector reaches
the background value, the equipment sprays helium gas. The leak
detector makes a leakage rate judgment based on the penetration of
helium gas.
Feature of Ceramic Component Helium Detection System:
1. Helium mass spectrometer leak detector: leak detection
equipment, including two parts: host and mechanical pump
2. Leak detection tooling: Customized matching fixtures for
different products, including island valves, air circuits, machined
parts, etc
3. Electric control system: Implement one click operation of the
entire leak detection system, automatically completing the leak
detection process, including switch buttons, touch screen, etc
4. Pneumatic actuator: including air source processing accessories,
valves, cylinders, pipelines, joints, etc
Parameter of Ceramic Component Helium Detection System:
| Model | HJ113 |
| Test Capacity | ≥50pcs/H |
| Tracer Gas | Helium Gas |
| Leak Rate | Start helium spray leak detection when it reaches 1*10-8 Pa·m3/s |
| Helium recovery | No recycling |
