Application:
Twice-setting Rack Loading and Unloading System is the important
machine for producing high-grade face bricks/big size hollow
bricks. This system comes with cutting, wet brick grouping,
loading, rack transporting, rack unloading, dry brick grouping,
brick stacking etc.
This system is suitable for production of normal wall materials,
face bricks, insulating big blocks etc.
Features:
Twice-setting system is the only choice for auto production of face
bricks, big size blocks and wall boards
Single layer stack and drying can be achieved by this system
Finished bricks with higher quality and appearance grade, easy to
sell at good price
Can work with hoffman kiln and tunnel kiln
Fully automation system can improve working efficiency and
productivity
Easy to operate and maintenance, really achieve fully automatic
production line
Working Principle
Firstly, mud columns are cut into pieces of bricks by vertical
cutting device, then wet bricks will be pushed onto the grouping
system, then transferred to the pallet which is on the loading
frame. When the loading frame with full of pallets, forklift comes
and moves the loading frame into the drying chamber to dry the
bricks. After drying, forklift comes and move the loading frame to
the new working position, then unload all pallets one by one. The
pallets will be moved to the re-grouping area, here the dried
bricks will be separated again, then by Robot stacking machine,
will be placed onto the kiln cars, entering tunnel kiln to finish
fire process.
Overseas Project Show
Clay brick making machines for automatic brick manufacturing plant
are widely exported to the whole world, such as Uzbekistan, Russia,
Indonesia, Vietnam, Myanmar, Malaysia, South Africa, etc. Below are
the projects show for auto clay brick factory, share with you...
Finished Brick Samples
According to different usage purpose, finished bricks can be
divided into out-wall decoration bricks, and inner-wall
construction bricks.
Out-wall decoration bricks come with smooth surface and uniform
color , and normally burning fuel is natural gas or coal powder,
which is showered into the burning kiln by specific tube system.
Out-wall decoration bricks also can be called as Face bricks.
Inner-wall construction bricks, normally featured with rough
surface, but higher strength. Burning fuel for inner-wall
construction bricks is coal, which can be added into the raw
materials, or threw from the top of burning kiln.
Below is the sample for finished bricks, the size, shape and hole
rate can be customized as the production requirements of clients.
Customers Show
With around 20 years experience of international trading, Halstec
has set up more than 200 brick factories all over the world, such
as Indonesia, Uzbekistan, India, Myanmar, Vietnam, South Africa,
Zimbabwe, Bangladesh, etc. Below is the glimpse of our clients,
hope can be your partner in very soon future.
General RFQ...
Q1: What can the machines be used for ?
These brick making machines can be used to produce fired red clay
bricks, solid bricks, hollow bricks, perforated bricks, fired clay
bricks, etc.
If you want to set up one brick factory or brick making plant, to
make bricks and sell bricks, then you will need these machines.
Q2: How much the machines or whole production line?
Price could be huge difference according to different production
requirements. For example, one day make 100000 bricks, one day
200000 bricks, or one day 300000 bricks, would need different
model, different capacity machines, also kilns. So if wanna to get
accurate reference price, then better consider what kind of factory
you want to own first.
You can get reference invest idea as: 200000USD, 500000USD,
1000000USD... etc
Q3: What will be needed for one brick factory?
Actually, when you have an idea to set up brick factory, you have
to think about the land, electricity, workshop, brick machines,
electrical equipment, brick dryer, brick oven/kiln, etc.
Q4: What should be consider before setup one new automatic brick
plant?
-Better to make some investigation for local market requirements,
find out which capacity is good to run, for example, one day 100000
bricks, one day 200000 bricks, or one day 300000 bricks??
-Then confirm the brick type and size, and related daily quantity.
- Get the initiatory design for whole line, which can be reference
for land purchase.
-Confirm the raw materials condition, better make a material test
before purchase land.
-Burn bricks will need burning fuel, so coal powder or natural gas,
which one is available.
-Combine the investment to confirm final design for whole brick
manufacturing plant
-Start purchase and construction work...
