Single Phase Filter Function Swimming Pool Water Pump Both For
Fresh / Sea Water
Paramerter:
| Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) |
|
| FBS-100 | 220V-380V | 50/60 | 0.75 | 1 | 7 | 16.5 | 50 1.5” |
|
| FBS-150 | 220V-380V | 50/60 | 1.1 | 1.5 | 8.5 | 18.5 | 50 1.5” |
|
| FBS-200 | 220V-380V | 50/60 | 1.5 | 2 | 10 | 21 | 50 1.5” |
|
| FBS-300 | 220V-380V | 50/60 | 2.2 | 3 | 13 | 25 | 50 1.5” |
|
USE AND MAINTENANCE:
1. You should make the pump working in the standard rotate speed in
use process, don't speed up at will, in order to avoid potential
safety hazard and impact the useful life of the pump.
2. Direct coupled type pump units:the chassis must remain stable,
so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the
belt loose or tighten must be moderate. If the pump doesn't turn,
it is generally because the impeller-ring get rusty, you can use
the mallet knocking the coupling axially.Pump mounting height(in
order to suction the water tank as the base)should be less than the
permit smoking on 1-2meter high vacuum.
3. You should stop the engine if you discover abnormalities(such as
noise, shock, hydraulic discharge descend etc.),and attention the
bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in
the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop
using it in case frost crack.After the pump every 1000 hours
operating time, you should take down and clean the bearing, and
exchange quick-wear parts.
Working Conditions:
M edium temperature:5~50 C
Environment temperature:< 60 C2. Application :
FRE ESEA circulation&filtration pump canbe used for
aquaculture, water project, large sizeswimming pool,water park,
etc.
Quality Assurance:
1. Product qualifaction rate box 100%.
2. 1 years factory warranty period.
3. Less than 2‰ defective rate.
4. 24hrs after-sales service.
OUR SERVICE:
We take customer needs very seriously. Tasks and challenges are
solved together
with the customers - using our high expertise in product
technologies, process
technologies and logistics. Our professionalism guides us through
the development
and production process.
Knowing the customer is the priority of all we do.With the
customers' specific
technical data and requirements fully in mind.We make a promise
that every
process of the cooperation is clear. As production begins, we focus
on working along
multiple lines. Even once the order has closed, MEDAS still
provides meticulous
after-sales service.
