Big flow Rate Yellow Color High Efficiency Hydroponic Water Pump
Paramerter:
Model | Power W | H-max M | Hose Size mm | Dimension mm |
FS-004 | 4 | 0.6 | 8.5 | 35X35X25 |
FS-007 | 7 | 0.85 | 8.5/13 | 37X35X30 |
FS-008 | 8 | 1.2 | 8.5/13 | 45X45X36 |
FS-015 | 15 | 1.6 | 8.5/13 | 70X52X62 |
FS-021 | 21 | 2 | 16/19/25 | 90X60X72 |
FS-030 | 30 | 2.2 | 16/19/25 | 90X60X72 |
FS-045 | 45 | 2.5 | 16/19/25 | 110X72X100 |
FS-050 | 50 | 2.8 | 16/19/25 | 135X95X113 |
FS-060 | 60 | 3 | 16/19/25 | 125X72X100 |
FS-080 | 80 | 3.5 | 16/19/25 | 150X90X125 |
FS-095 | 95 | 4.5 | 16/19/25 | 155X88X125 |
FS-150 | 150 | 5 | 16/19/25 | 175X105X140 |
Maintenance:
1. If the pump will be not used for long-term, Please take the pump
out of the water, and let the pump work in the clean water for a
moment, and then dean the parts of pump and wipe clean
2. If the temperature is below 0 C, please take the water pump from
the water immediately and discharge accumulation of water in the
pump in case pump is broken because of freezing
Outlook
At present, the efficiency of silicon solar panels is difficult to
increase in a short period of time. Although the second-generation
thin-film solar cells and the third-generation organic solar cells
have obvious advantages in cost, they are currently mass-produced
with silicon solar panels. Compared to not competitive. In the
future, silicon panels will still occupy a large market share.
Therefore, in the future, the research and development direction of
solar pump systems should focus on the following three aspects:
(1) Research and development of high-efficiency pumps and motors to
improve the range of high-efficiency zones of motors and pumps
under a wide range of speeds and flow rates and to reduce the
system's pumping threshold power. Develop low-cost,
high-reliability intelligent controllers to improve performance
matching between components and respond to changing weather
conditions, thereby improving system dynamic quality and overall
efficiency. At the same time, the development and promotion of
comprehensive technologies for complementary energy utilization of
small and medium-sized wind-light-heat;
(2) General methods for predicting long-term performance of solar
pump systems under multi-factor changes such as climate, light,
water level and water demand, and system design methods based on
dynamic changes, establishing databases in different regions to
gradually replace the method of estimating static averages ;
(3) With the reduction of the price of the panel and the
development of small and medium-sized solar systems, in the future,
on the basis of optimizing the power of the panel, the evaluation
of the operational reliability of the system should be increased to
improve the long-term reliability of the system and the stability
of the water supply.
