Carton Box Stitching Machine Description
The manual nail box machine is a kind of mechanical equipment used
for the back cover of cartons. It can drive nails into the bottom
and corners of cartons through pedal or manual operation to make
the cartons stronger. The advantages of the manual nail box machine
are simple structure, convenient operation, low cost, suitable for
small carton factories or express companies.
The detailed introduction of the manual nail box machine is as
follows:
The structure of the manual nail box machine is: mainly composed of
nail head, supporting arm, driving motor, transmission clutch, body
and foot switch. The driving motor is generally 0.5 kilowatts,
using single-stage or double-stage V-belt transmission power, and
has only one speed ratio with the motor. When working, the motor
runs, but when the foot switch is not pressed, the transmission
clutch does not act, the nail head is not nailed, a nail box is
needed, the cardboard is manually supported, the switch is pressed,
the clutch is turned on, the nail head moves, and the nails are
cycled. The more complicated part of this machine is the nail head
and the mechanical clutch. 1
The manual nail box machine is characterized by simple structure,
convenient operation, good wear resistance, smooth sealing, safety
and firmness, and can reduce labor intensity and improve work
efficiency. 2
The scope of application of the manual nail box machine is that it
is widely used in the sealing of various cartons and
calcium-plastic boxes that need to be loaded with heavy items or
that are not easy to seal with adhesive tape. 1234
The operating procedures of the manual nail box machine are:
The operation of the nailing machine must be certified.
Check before operation: Manually pull the V-belt connecting the
motor and the machine to observe whether the punch is flexible up
and down, whether there is oil leakage, etc.
Test run: Turn on the switch to run, then step on the foot switch,
listen to whether the sound is normal, and ensure that there is no
abnormality before starting the machine.
During the operation, hold the front of the carton with your right
hand and pull it forward, and hold the other end with your left
hand to help the right hand stabilize. When the right hand pulls
forward and moves, the left hand generally does not move. When a
particularly large product needs to be moved with the left hand, it
should also be at a distance from the punch. The falling position
should stop at 40 cm.
During the work, the product must be put away with both hands and
moved to a safe position before stepping on the foot switch to
work.
Chatting, playing, and other distracting behaviors are prohibited
at work, and you must concentrate on operating production.
When the equipment fails to be repaired, "maintenance, no power on"
must be displayed, the main power supply must be turned off, and
special personnel must be arranged to be on duty.
It is forbidden for any non-professional maintenance personnel to
repair or modify the machine without authorization.
After the work is over, turn off the power and carry out daily
maintenance and "7S" work.
FAQ
| Q | A |
| Are you the trader or manufacturer? | We are the manufacturer with export qualification |
| Do you make oem? | Yes.here can do |
| 5.where are your factory located in? | We are in dongguang town,cangzhou city,hebei,china |
| What is your business process? | Talking about clients requirements, confrim machines, make sales
contract,pay for deposit,supplier arrange production,finish
producing machines,buyer test machines,buyer pay for the balance
payment,supplier delivery machine. |
