Product introduction
Good Quality Pharmaceutical Powder Mixer Glucerna Mix V Type
Blender Mixers
The machine is used for the mixing of dry powder and granular
materials with good fluidity; Finished or semi-finished materials
are evenly mixed. It is composed of two asymmetric cylinders, and
the material can flow in vertical and horizontal direction, and the
mixing uniformity is more than 99%. The machine can use vacuum
suction, sealed operation, no internal transmission structure,
clean, in line with GMP requirements.
This series of mixer has two kinds of forced mixing type and
ordinary mixing type, forced mixing machine mainly for finer powder
or for a main content of less material can be mixed evenly;
Ordinary type mixer is mainly suitable for general materials or
large output of the enterprise use. Smooth cylinder without dead
Angle, the whole machine is made of stainless steel material, and
the appearance is beautiful.
Technical parameters
We can produce more different specifications of the V mixer, if you
want to customize your machine, please contact us.
| Model | VH-0.1 | VH-0.2 | VH-0.3 | VH-0.5 | VH-1.0 | VH-2 | VH-3 |
| Total volume(L) | 0.1 | 0.2 | 0.3 | 0.5 | 1.0 | 2 | 3 |
Maximum loading volume(L) | 30 | 60 | 90 | 150 | 300 | 600 | 900 |
Dimension (mm) | 1650*500 *1550 | 1800*550 *1650 | 1900*600 *1750 | 2300*700 *2100 | 2700*1000 *2500 | 3200*1200 *3350 | 3600*1400 *3850 |
Barrel diameter(mm) | Ф200 | Ф400 | Ф500 | Ф600 | Ф800 | Ф1000 | Ф1200 |
Inlet diameter(mm) | Ф250 | Ф300 | Ф300 | Ф300 | Ф400 | Ф400 | Ф400 |
| Outlet diameter(mm) | Ф80 | Ф100 | Ф100 | Ф150 | Ф150 | Ф200 | Ф200 |
| Cylinder speed(r/min) | 15 | 15 | 15 | 13 | 10 | 10 | 8 |
| Power(kw) | 1.1 | 1.5 | 1.5 | 1.5 | 3.0 | 5.5 | 7.5 |
Structure features
1. Due to its excellent structure and reasonable design concept,
the mixer has the advantages of fast mixing and uniform mixture.
2. Using the principle of gravity diffusion mixing, the pressure
feed of the material is small, and the material will not be cut and
crushed.
3. The cylinder is made of high-quality stainless steel, the inner
and outer walls are polished, no pollution to the material during
the mixing process, low power consumption, easy to clean.
4. The use of stainless steel butterfly valve discharge, no dust
leakage and flying phenomenon.
5. Large volume mixer can be configured with vacuum feeding system,
improve work efficiency and improve the working environment.
6. Especially suitable for mixing materials with similar particle
size and apparent density. The V-shaped mixer can be rotated on the
axis of the V-shaped mixer, and the forced mixing blade can be
added in the V-shaped cylinder to speed up the mixing speed, and it
can also be applied to the mixing of easily condensed materials.
Equipment selection
1. Determine the volume, weight and density of mixed materials in
each batch, and select equipment of corresponding specifications .
2. Determine the material of the equipment, which can be divided
into the part in contact with the material and the part not in
contact with the material.
3. The material is determined according to the material nature,
working condition requirements, health level and other factors.
4. Determine the equipment internal and external surface treatment
requirements, conventional wire drawing, mirror, etc.
5. According to the density and flow properties of materials,
determine the size of the motor and reducer. Determine if a
forced-stirring system is configured.
