Laboratory Instruments Portable Electronic Sampling LCD Display microbiological air
sampler high volume air sampler
Microbial air sampler is a kind of high-efficiency multi-hole
inhaled air sampler.It is designed in accordance with the principle
of isokinetic sampling,It samplers directly and keeps wind speed of
sampling basically consistent with that of clean room,so that
reflecting the concentration of animalcule in clean room more
accurately.When sampling ,the air with puffball will bump into the
agar surface in culture dish through tiny holes swiftly.These
animalcules grow quickly with the help of agar surface,thus the
result will be obtained faster.
Main characters:
1. Sampling hole has many small holes to reduce particles
superposition and reduce error of animalcule count;
2. Programmable, sampling quantity can be set from 0.01 to 2.0cbm;
3. LCD screen displays sampling quantity, sampling time and other
parameters;
4. Up to 256 samples data storage of sampling time, sampling volume
and other parameters;
5. Portable, lightweight, convenient to use;
6. Easy to exchange substrate utensil, just only take down sampling
hole to exchange
substrate utensil. (Diameter is 90 x 15).
Parameters:
1. Sampling volume: 100L/min;
2. Wind speed of sampling holes: 0.4m/s, basically the same as that
of clean room (isokinetic sampling);
3. Power supply: AC and DC;
4. Rechargeable battery: DC 6V;
5. Operating time on battery: 4h;
6. Dimension: 120 x 300 ;
7. Weight: 2kg.
| Sampling inlet has many tiny holes to reduce puffball superposition
and error of animalcule count. |
| Sampling flow | 100L/min |
| Inlet impact speed | 0.38m/s basically the same as the speed of clean room. (isokinetic sampling) |
| Sampling quantity | can be set from 0.001—9.999m³ |
| Standard dimension of culture dish | Φ90*15 |
| Power supply | DC16.8V chargeable battery which can supply 4hours power |
| Dimension | Φ120*325 |
| Weight | 3.0kg |
Q:Can you arrange the visit to your user?Can you customized the
machine according to our requirements?
A:Yes,Of course!
Q:Is your equipment in accordance with GMP,FDA,WHO?
A:Yes,we will design and manufacture the equipment according to the
requirement of GMP/FDA/WHO in your company.
Q:How about your after sale service?
A:We will reply you within 24hours by email or phone.
If we have local agent,we will arrange him to your site within 24
hours to assist you to shoot the problem.
Q:How about the staff training?
A:Normally,we will train your staffs during the installation in your
site,you are also welcome to send your staff train in our factory.
Q:How long will the turnkey project take?
A:About 1 year from designing the layout to finish installation and
commissioning.
Q:Which kind of after-sales service you can offer?
A:Except the regular service ,we can also provide you know-how
transfer,and dispatch our qualified engineers to help you run the
factory up to 6-12 months.
