Custom Pvc Calendering Machine Two Roll rubber Mixing Mill
Processing Machinery
Application:
It is widely used in rubbers and plastics industry for polymer
mixing, such as PVC, color master batch. It consists of roll,
bearing, gap adjusting device, electric control system, safety
device, etc.
ZL-3018 Two roll mill.pdf
Introduction:
The main working parts are two hollow rollers or drilling rollers
that rotate in opposite directions. The one installed on the
operator's side is called the front roller, which can be moved back
and forth horizontally by manual or electric action, so as to
adjust the roller distance and adapt to the operation requirements;
The rear roller is fixed and cannot move back and forth. The size
of the two rollers is generally the same, and they rotate relative
to each other at different speeds. The raw rubber or rubber
material is drawn into the gap between the two rollers with the
rotation of the rollers, and is subjected to strong shearing to
achieve the purpose of plasticizing or mixing. Open mills are also
used in sectors such as plastics processing.
Technical parameters:
| | | | | | | | |
| Roll Hardness | HRC 50 ~ 60 |
| Temperature Accuracy | ± 2 ℃ (we adopt the high accuracy PID micro computer controller)| Model | | ZL-3018-76 | ZL-3018-120 | Zl-3018-160 | ZL-3018-200 | Zl-3018-230 | Zl-3018-300 | ZL-3018-400 | | Diameter of roll | mm | 76 | 120 | 160 | 200 | 230 | 300 | 400 | | Length of roller face | mm | 300 | 350 | 350 | 500 | 650 | 650 | 900 | | Mixing Capacity | kg | 0.002-0.6 | 0.002-2 | 0.002-2.8 | 0.002-5 | 0.005-10 | 1-15 | 5-30 | | Front roll surface speed | rpm | 19 | 19 | 19 | 19 | 19 | 19 | 19 | | Friction ratio | | 1:1.30 | 1:1.35 | 1:1.35 | 1:1.35 | 1:1.27 | 1:1.27 | 1:1.27 | | Roll gap range | mm | 0-3 | 0-6 | 0-6 | 0-8 | 0-12 | 0-12 | 0-15 | | Driving Power | KW | 1 | 1.5 | 2.2 | 7.5 | 11 | 30 | 37 | | Heating Mode | Electricity heating , Oil Heating ( option) | | Cooling Mode | Water Cooling ( option) | | Roll Temperature | Room temperature -- 300℃ |
|
| Safety device | It have 6 safety buttons and safety guard is option |
| Machine weight | kg | 160 | 460 | 660 | 860 | 1960 | 2960 | 3800 |
| Overall dimension | mm | 1100x400x1180 | 1100x550x1380 | 1200x650x1380 | 2200x750x1380 | 2200x950x1580 | 2600x950x1580 | 5295x1789 x170 |
| Power | 380V 3 phase 50-60hz |
Advantage Service:
1. We have R&D, designing department which can not only provide
technological machines but also can satisfy special customized
needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and
sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental
laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet
customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base,
equipped with 120 technicians, we are capable to take large budget
project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can
ensure accuracy; All machine appearance is anti-rust electrostatic
painting;
2. Imported electronic components:
ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron and
imported compressor:BOEK/TECUMSEH, which can keep the machine’s
service life over 10 years.
