Yellowish - Green Metal Cutting Coolant , Cooling Soluble Oil
Cutting Fluid
Metal Cutting Coolant Introduction
Metal Cutting Coolant is a fully synthetic cutting fluid,mainly
used for grinding,have a good effect on processing of carbon steel,
copper alloy in the common grinder,creep grinder, precision
grinder.It is suitable for general machining of metal cutting
machine tool by properly increasing the concentration.
Metal Cutting Coolant features:
1, Be composite by high performance synthetic lubricants, anti-rust
agent, and several additives, with excellent thermal stability
2, Excellent cooling and cleaning performance,long anti-rust
period,and has good lubricity
3, Do not contain sodium nitrite, sulfur, chlorine and additives
including phenol, does not stimulate the skin, do not pollute the
environment
4, Good hard water resistance performance,low foam
Metal Cutting Coolant Technical parameters
| Item | Quality index | Test method |
Original solution appearance,15~35℃
| Yellowish-green liquid | GB/T6144 5.2 |
Diluent(5%) | Defoaming ability mL/10min | ≤2 | GB/T6144 5.6 |
| pH | 9.0～10.0 | GB/T6144 5.5 |
Corrosion test,full immersion,55±2℃ | First grade grey casting iron | 24 | GB/T6144 5.8 |
| T3 Red copper | 24 |
| H62 Brass | 24 |
| Anti-rust test | First grade grey casting iron 35±2℃ | single | 24 | GB/T6144 5.9 |
Metal Cutting Coolant Instructions:
1, Use (change)of new fluid method: before using the new
liquid,clean the storage tank and piping circulation(with
concentration diluent and adding bactericide 0.3 ~ 0.5%),at last
add the productt evenly circulation can be used
2, Tank liquid supply or maintenance: when need supply tank need
supply,should add water with corresponding percentage of original
solution,should clean the oil slick in the tank liquid during use,
regularly test PH value of tank liquid, when the PH value is less
than 8.5, should supply or change new solution.
Other matters:
1, Package:25kg/plastic drum,200kg/plastic drum,1000kg/plastic drum
2, Shelf life:two years
