Dial Reading 0.5HR Rockwell Hardness Testing Machine with Motorized
Loading Control
Brief Introduction:
iqualitrol SHR-150E analogue gouge resolution is 0.5HR, it is
useful to improve the reading accuracy than traditional 1HR
resolution;
iqualitrol SHR-150E dwell time from 1 to 60s can be setup by the
“time key" on the panel, it is much conveninent than the setup on
the manual hardness tester;
iqualitrol SHR-150E force knob adopts the metall material to
replace the plastic, it improves the instrument performances;
iqualitrol SHR-150E loading, dwell and unloading is driven by
electronic motor automaticly, doesn't need the operatorto handle
it, largely eliminates the human operating error maxiumly;
iqualitrol SHR-150E intenter protector is availabe to improve the
using lifetime of indenter.
Application Range:
Quenched steel, quenched and tempered steel, annealed steel,
bearing steel, strip steel, hardened steel sheet, hard alloy, etc.;
Technical Specifications:
| Model | SHR-150E |
| Initial test force | 10kgf(98.07N) |
| Total force | 60kgf(588N) 100kgf(980N) 150kgf(1471N) |
| Rockwell Scales | HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK |
| Test range | HRA:20-88 HRB:20-100 HRC:20-70 HRD:40-77 |
| HRF:60-100 HRG:30-94 HRH:80-100 HRK:40-100 |
| Hardness Reading | Dial reading, resolution 0.5HR |
| Executive standard | GB/T230.1, GB/T230.2 Chinese Standard JJG112 verification regulation |
| Maximum height of Specimen | 170mm |
| Indenter - outside wall distance | 135mm |
| power supply | AC220V+5%,50~60Hz |
| Dimensions (mm) | 463×240×650mm |
| Net Weight | 80kg |
Standard Delivery:
| Name | Quantity | Name | Quantity |
| Diamond Rockwell Indenter | 1 | Diameter 1.5875mm ball indenter | 1 |
| Rockwell hardness block | 3 | Large, Medium and V Test Anvil | 1 each |
| Screwdriver | 1 | Dust-proof cover | 1 |
| Power cable | 1 | Fuse | 2 |
| Instruction manual | 1 | Accessory box | 1 |
