Hub USB2.0 Version USB To Fiber Optic Converter Max Distance Of
20km
USB2.0 to Fiber Extender Hub version 4port USB to Fiber Extender
4 Port USB 2.0 Fiber Optic Extender, Also called 4 Port USB2.0 To
Fiber Converter. The device includes a transmitter and a receiver,
which can extend the USB 2.0 device to a remote location over 1
fiber cable, max distance of 20km (SM fiber). An integrated
four-port hub allows for the extension of up to four USB devices
without the need for an additional hub.
The device can be widely used in military command and control
systems, police command and control systems, traffic management
systems, energy and electricity supply industries, government
offices, medical systems, commercial presentations, multimedia,
public utilities, etc.
Features:
1, Max extension distance 20km (SM fiber cable).
2, Single/Duplex fiber transmission, pure hardware design, no
driver needed, compatible with all operation systems, support plug,
and play
3, Auto recognition of
High-speed(25Mbps～480Mbps),Full-speed(500Kbps～12Mbps),Low-speed(10Kbps～1.5Mbps)USB
device.
4, Support USB1.1 and USB 2.0 devices, cameras, printers, U disk,
scanners, audio devices, touch screens, game controllers, mouse,
and keyboard, etc.
Product specification:
| Optical | Connector | SC/FC/ST/LC |
| Wave length | 1310nm/1490nm/1550nm |
| Physical | Size (L× W ×H) | 104mm x104mm x28mm |
| Case | Aluminum |
| Color | Black |
| N.W. | 0.75Kg |
| Power | Voltage | 5~12V DC |
| sender power consumption | <20W |
| receiver power consumption | <5W ,Powered by USB cable, no external power adapter required |
| Environment | Working temperature | -20℃-70℃ |
| Storage temperature | -40-85℃ |
| Humidity | 0-95% (non-condensing) |
USB interface(Type A):
| RX | 1, connect to PC |
| TX | 4 , connect to USB devices, max 500mA |
Panel diagram:
Note:
- When the fiber and data are connected, the F & D indicator flash,
otherwise off. Then the USB indicator is on when the transmitter is
plugged into the USB device, otherwise off. If the indicator is not
normal, need to re-plug the USB device.
- If the total power consumption of the USB device on the device side
exceeds 8W, it is recommended that the USB device must use an
external power supply. Otherwise, after calculating the power loss,
reselect the power adapter of the extender.
Connection diagram:
