DPJ-100 Single Layer Roll Feeding Cup Lid Forming Machine
DPJ-145 Single Layer Roll Feeding Bowl Lid Forming Machine
DPJ-200 Single Layer Roll Feeding Super Bowl Lid Forming Machine
The electric furnace is divided into two sections: preheating and
heating; the forming heating plate is automatically closed and
opened, and the start-up can be delayed after the heating plate is
put down to limit the waste of materials within one stroke. Due to
the use of body-fitting heating, the heating power and temperature
are reduced, energy is saved and the stability of the plastic sheet
is enhanced.
The automatic single-layer paper lid forming machine is suitable
for lids made of coated paper, ice cream cup lids, coffee cup lids,
noodle bowl lids, salad bowl lids, etc. It has largely replaced the
plastic cover on the market.
The mold is clamped by pressing plate, which is convenient for
adjustment and installation.
Using the manipulator to clamp the feeding mechanism, the operation
is stable, the synchronization is accurate, and the stroke can be
adjusted arbitrarily from 150-230mm;
All parts in contact with the plastic sheet are made of stainless
steel or non-toxic materials, in line with "GMP" requirements.
Technical Parameters
Customs code: 8441309000
Paper cover specifications:
height (8-15) mm, DPJ-100/S100 diameter (60 -100) mm, speed:
(70-100) pieces per minute.
Height (8-15) mm, DPJ-145/S145 straight strength (100-140) speed:
(60-75) per minute.
Height (8-15) mm, DPJ-200/S200 diameter (140 -200) mm, speed:
(45-60) pieces/min
Applicable paper: single and double PE/PLA coated paper, coated paper, glazing coated paper (250-480g/m2)
Power: 10kw
Power supply: AC380V 3-phase, 50Hz (can be customized according to
customers)
Working air source: air consumption 0.02 cubic meters per minute,
working air pressure 0.3MPa
The total weight of the equipment: Cup lid machine .2100KG.
Bowl cover machine.2500KG.
Giant bowl machine 3300KG.
