All parts of the cup lid forming machine in contact with the
plastic sheet are made of stainless steel or non-toxic materials,
in line with GMP requirements.
The main motor of the cup lid forming machine adopts frequency
conversion speed regulation: the number of punching times can be
adjusted from 10 to 20 times per minute, and the appropriate number
of punching times can be set according to the length of the stroke
and the difficulty of forming.
The pneumatic system of the cup lid forming machine adopts
photoelectric control, programmable through PLC, so that each
mechanism can run accurately and ensure the stability of
desynchronization in multi-station and long-distance operation of
packaged products.
The mechanical transmission adopts the reducer to connect with the
main shaft, and the main shaft is on the same axis line to reduce
the transmission error.Using the manipulator to clamp the feeding
mechanism, the operation is stable, the synchronization is
accurate, and the stroke can be adjusted arbitrarily from
150-230mm.
Technical Parameters
Customs code: 8441309000
Paper cover specifications:
height (8-15) mm, DPJ-100/S100 diameter (60 -100) mm, speed:
(70-100) pieces per minute.
Height (8-15) mm, DPJ-145/S145 straight strength (100-140) speed:
(60-75) per minute.
Height (8-15) mm, DPJ-200/S200 diameter (140 -200) mm, speed:
(45-60) pieces/min
Applicable paper: single and double PE/PLA coated paper, coated paper, glazing coated paper (250-480g/m2)
Power: 10kw
Power supply: AC380V 3-phase, 50Hz (can be customized according to
customers)
Working air source: air consumption 0.02 cubic meters per minute,
working air pressure 0.3MPa
The total weight of the equipment: Cup lid machine .2100KG.
Bowl cover machine.2500KG.
Giant bowl machine 3300KG.
Cup lid machine packaging size 1920*1640*2000
Bowl cover machine packaging size 2200*1880*2100
Giant bowl lid machine packaging size 2600*1850*2200
