Introduction:
Galvanized plastic coated reinforced gabion is a new type of
retaining structure. Galvanized plastic coated reinforced gabion by
machine woven hexagonal double stranded steel wire mesh surface
combination of engineering components, is a new type of application
in the field of reinforced soil structure system. The wall gabion
mesh is partially filled with stone, and the structure is filled
with layered compaction. The structure is flexible, permeable and
integrated. The scheme has the advantages of small footprint, low
bearing capacity, low cost and good ecological effect.
Features:
1, durability: the surface of low carbon steel wire by special
process thick coating corrosion treatment, durable, according to
the structure of the environment, can choose different corrosion
treatment products, adapt to a variety of environments and meet the
requirements of structural design life.
2. Economy: The construction is simple and quick, and the
comprehensive cost is low.
3, the construction speed is fast: the filling method of stone
filling is very flexible.
4, water permeability: galvanized plastic coated with reinforced
gabion filling material is hard, the size of stone between 100mm ~
300mm, with good water permeability.
6, flexible: flexible structure is between the rigid material and
loose material between the flexible material, its high flexibility
makes the structure can adapt to large uneven settlement and can
not predict local erosion, the structure can be adjusted,
self-healing.
7. Ecological and environmental protection: first, local useless
stone resources can be used according to local conditions; The
second filling stone pore can be put into the soil, provide
conditions for plant growth, conducive to ecological recovery; The
third is to silence and collect light, close to nature.
Galvanized plastic coated reinforced gabion main specifications:
| Standard type | Standard type | L=Length(M) | W=Width(M) | H=Highly(M) |
| L×2×1×1 | ≥3 | 2 | 1 |
| L×2×1×0.8 | ≥3 | 2 | 1 |
| Note: 6×2×1×1, length 6m, width 2m, height 1m, the thickness of 1m
plated gaulfan coated with reinforced gabion, wall gabion internal
according to 1m interval placement partition, length and width and
height so the error ±5%. |
| .Mesh type | product name | Mesh type | D(mm) | tolerance | With steel wire surface |
| Reinforced stone cage net | 8×10 | 80 | -400 | 2.7 |
| Wire parameters | Wire type | With steel wire surface | Side end of the wire | Binding wire |
| Diameter(mm) | 2.7 | 3.4 | 2.2 |
| Out Diameter(mm) | 3.7 | 4.4 | 3.2 |
| diameter tolerance(±)mm | 0.08 | 0.09 | 0.07 |
| Minimum coating quantity(g/㎡) | 245 | 265 | 230 |
| Note: Tensile strength of steel wire shall be 350-550N/mm²,
elongation of unbraided steel wire shall not be less than
12%(elongation of braided steel wire shall not be less than 7%),
diameter of steel wire shall refer to before stretching. Wire
diameter tolerance and elongation should be tested at random before
each batch of wire braiding. |
| Covering plastic target | target | Skills required | target | Skills required |
| Color | gray | tensile strength(Mpa) | ≥20 |
| density(g/cm³) | 1.35-1.4 | Crack elongation% | ≥200 |
| Shore A hardness | 90-100 | Cover thickness of the plastic(mm) | 0.5 |
