Automatic Servo Motor Intelligent Litho Laminator Corrugate
Cardboad Mounting Machine
The ZGFM series of automatic high-speed intelligent flute
laminating machines of the Anhui Innovo Bochen Machinery
Manufacturing Co., Ltd. can finish the coating of corrugated
products, the mounting and the paper on the cardboard, and
guarantee the highest precision and product quality.
GFM series full automatic high-speed intelligent paper mounting
machine equipment has rich hardware configuration, can adapt to
almost any product of the requirements of the glue on the mounting
The paper is sent out by the paper feeder and sent to the actuator
of the gauge mechanism to detect the paper
Send out;The paper and the paper are sent to both sides of the
paper respectively after the paper is coated with glue by the
rubber wheel
Synchronization detector, after detection by the controller
calculation of the paper and base paper error, and from the paper
two
The side servo compensator compensates the surface paper to a
predetermined position for bonding, and then passes through a
pressurized conveyor
Press the paper and transfer to the paper receiver to collect the
finished product
| Model | ZGFM1900 |
| Max paper | 1900*1900mm |
| Min paper | 500*500mm |
| Top sheet thickness | ≤10mm |
| Working speed | 160m/min |
| Accuracy | ± 0.8mm |
| Total power | 20kw |
| Dimension | 16500*2748*3520mm |
Structure
A. Paper feeding machine: it can send piles of 150 ~ 800gsm paper
from the top.
B. Paper feed on the bottom board: the cardboard of 0.5-1omm can be
sent from the bottom.
C. Gluing mechanism: the adhesive can be applied to the paper.
D. Gauge mechanism - affixes two sheets of paper to the set
tolerance level.
E. pressure conveyor...Press the attached paper and transfer it to
the receiving section.
