HIGH SPEED INTELLIGENT FLUTE LAMINATOR MACHINE FOR 1450*1450
LAMINATING CARDBOARD AND CORRUGATED PAPER
1. Product description
1.1 Function:
The paper can be laminated with paperboard to increase the strength
and thickness of the material or special effects. After the
die-cutting, it can be used for packaging boxes, billboards and
other purposes.
1.2 Structure:
A. Upper Paper Feeder: It can send stacks of 120-800gsm paper from
above.
B. Bottom feed: It can send 0.5~10mm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed
paper.
D. Regulatory organization - Fits the two papers according to the
set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys
it to the delivery section.
1.3 Principles:
The top paper is sent out by the upper paper feeder and sent to the
start detector of the positioning mechanism for detection. Then the
bottom paper is sent out; after the bottom paper is coated with
glue on the glue wheel, the top paper and the bottom paper are
respectively conveyed to the paper Synchronous detectors on both
sides, after the detection, the controller calculates the error
value of the paper and the bottom paper, and the servo compensation
device on both sides of the paper compensates the paper to a
predetermined position for splicing, and then pressurizes the
conveying. The machine presses the paper and conveys it to the
delivery machine to collect the finished product.
1.4 applicable materials:
Paste paper --- 120 ~ 800g/m thin paper, cardboard.
Bottom paper---0.5~10m/m paperboard, single-sided cardboard,
multi-layer corrugated paper, pearl board, honeycomb board,
styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the
glue.
Structural features:
Adopting the world's leading transmission control system, only need
to input paper size system auto-tuning.
Computerized high-speed fitting, up to 150m/min.
Chuanliu-type air supply head, with four sets of forward nozzles
and four sets of suction nozzles.
Feed Block adopts low stack cardboard, which can fit the paper to
the pallet, and can install track-assisted pre-stacker
Use multiple sets of electric eyes to know the advance position of
the bottom line, and make the servo motor on both sides of the face
paper to independently rotate to compensate the upper and lower
paper alignment, which is accurate and smooth.
Full-function electronic control system, using human-machine
interface and PLC program model display, can automatically detect
operating conditions and work records.
Automatic glue replenishment system can automatically compensate
for lost glue and cooperate with glue recycling.
Parameters:
| Model | ZGFM1450 | ZGFM1650 | ZGFM1900 |
| Max size | 1450*1450mm | 1650*1650mm | 1900*1900mm |
| Min size | 380*400mm | 400*450mm | 450*450mm |
| Top Paper | 120-800g | 120-800g | 120-800g |
| Bottom paper | ≤10mm ABCDEF corrugated board ≥300gsm cardboard | ≤10mm ABCDEF corrugated board ≥300gsm cardboard | ≤10mm ABCDEF corrugated board ≥300gsm cardboard |
| Max speed | 150m/min | 150m/min | 150m/min |
| Power | 25kw | 27kw | 30KW |
| Stick accuracy | ±1.5mm | ±1.5mm | ±1.5mm |
BRANCH INTRODUCTION:
1. BOTTOM PAPER FEEDING
Use imported Servo motor electric controlling system, with Japan
NITTA suction belt to make suction power inverter, and belt cleaned
by water roller; Patented technology to ensure corrugate and
cardboard goes out smoothly and simple operation.
2. TOP SHEET FEEDING MECHANISM
Equipped with high speed auto dedicated feeder, both paper lifting
and feeding nozzle can freely adjust angle to the paper, to ensure
that whether thick or thin paper can be delivered rapidly and
smoothly.
3. ELECTRICAL SYSTEM
Designed in the accordance with European CE requirement, ensure
machine stability, high efficiency and low failure. Using
man-machine interface and PLC combination, display all the
information, such as warning, error detect, failures, and operating
speed, etc on the screen at a glance.
4. PRE-STACK PART
Pre-stack pile of paper under the condition of non-stop, improve
efficiency.
The special design of the pre stack paper frame, save time and
effort.
5. TRANSMISSION
With imported double teeth belt drive and Switzerland ROSTA tension
device ensure the drive accurate, stable and low noisy.
