Suitable For Large Area Of Permanent Bearing Foundation
Reinforcement enhance roadbed 15KN Biaxial Plastic Geogrid
Biaxial Plastic Geogrid Introduction
Biaxial plastic geogrid is made of Polypropylene resin as its raw
material, ,it is produced through the process of extruding,
punching, heating, longitudinal stretching and transverse
stretching.
Main type: 15-15KN, 20-20KN, 25-25KN, 30-30KN, 35-35KN, 40-40KN,
45-45KN, 50-50KN
Width:1-5.95 meter
Longth: 50 meters
Colour: black, gray, green,
Biaxial Plastic Geogrid Specification
| project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Transverse tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
| Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
| Roll width | 3.95 or 5.95 meters |
| Roll Length | 50 meters |
Biaxial Plastic Geogrid Features
1. Increase the bearing capacity of the roadbed and foundation and
prolong their service life.
2. Prevent road surface and foundation from sinking or flawing,
keep clean and beautiful ground surface.
3. Enhance earth slope and prevent water loss and soil erosion.
4. Decrease underlayer thickness and save manufacturing cost.
5. Enhance the stability of side slope turf net patch to improve
greening.
6. Replace wire netting used in mine as intermediate ceiling
netting.
Biaxial Plastic Geogrid Usage
1. Reinforcement of road beds of various highways, railways and
airports.
2. Reinforcement of permanent bearing road beds of large parking
area and dock goods yard.
3. Slope protections and culvert reinforcement of railway and
highway.
4. Secondary reinforcement of soil slope after unidirectional
tension geotechnical grid reinforcement and further reinforcement
of soil slope sp as to avoid soil erosion.
5. Reinforcement of mile and gallery.
