120W 802.3bt Ultra PoE Injector Single Port 10Mbps 100Mbps 1000Mbps
Single-Port 10/100/1000Mbps 120W 802.3bt Ultra PoE Injector
Single-Port 10/100/1000Mbps 120W 802.3bt Ultra PoE InjectorAdvantages
· Up to 120W of PoE Power over 4-pairs
· PoH (802.3bt), IEEE802.3at and 802.3af compliant
· Supports 10/100/1000M LAN environment
· Power over Ethernet (PoE) Injector delivers a PoE signal for
distances of up to 100 meters (328 ft.)
· Plug & Play installation
· Data and power passed by the Ethernet cable
· Full protection: overload/overcurrent/over-voltage/short circuit
· Applications: IP phone, VoIP phone, wireless networks access
points, IP print servers, Bluetooth access points, security
cameras, the smart door system
· 100% full burn-in testing, strictly inspect and control during
production
Technical Indexes
| Product Name | 120W Single Port PoE Injector |
| Product Model | LNK-PSE1201G |
| Standard Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet |
| Regulatory Compliance | RoHS Compliant WEEE Compliant,CE/FCC FCC Part 15,Class B EN 55022 Class B |
PoE Output | PoE Pin: 4/5(+),7/8(-) and 3/6(+),1/2(-), 4pairs Transmission Rate: 10/100/1000Mbps Output Power: 48VDC Output Current: 2.5A Input Voltage: 100-240VAC Input Current: 0.6A@100-240VAC Frequency: 50-60Hz |
| PoE Surge Protection | Common-mode Surge Protection(10/700us): 6KV Clamp Voltage(1, 2; 3, 6; 4, 5; 7, 8): 7.5VDC AC Surge Protection Differential-mode(L-N): 6KV 2ohm Common-mode(L-PE, N-PE): 6KV 12ohm(1.2/50us) |
| Physical Interface | LAN: RJ45 POE: RJ45 AC port: three-pin AC power |
| Materials | Plastic (ABS+PC) |
| Output ripple | 1% max |
| Efficiency | 84% min |
| Response time | <1ns |
| Size & Weight | Size: 171mm X 97.5mm X 45mm (LxWxH) Weight: 535g |
| LED Indicator | POWER LED: GREEN ACTIVE LOAD LED, GREEN |
| Working Environment | Working Temperature: -10 to +40℃ Operation Height: -304.8m to 3048m Working Humidity : MAX 90％, non-condensation |
Overview
LNK-PSE1201G is a single port, wide-temperature, high power PoE
Injector, output 48VDC, 120W for remote PDs over full 4 paris,
transmission rate 10/100/1000Mbps. LNK-PSE1201G provides power for
IEEE802.3af/at/bt, PoH standard terminal devices, such as high
power stations, outdoor wireless AP, outdoor IP cameras.
LNK-PSE1201G is designed for working temperature during -10 to 40℃,
with the input voltage 100-240VAC. A detection chip inside, it will
do detection PDs before power. The better work distance is 100m, it
special suitable for complex power situations.
Ordering Information
| Model | Description |
| LNK-PSE1201G | 10/100/1000M 120W Single Port IEEE802.3BT PoE Injector |
