60W SFP Gigabit PoE Injector 55VDC 1100mA Output Voltage Power
60W SFP PoE Injector
60W SFP PoE Injector Advantages
► Gigabit SFP port for Fiber.
► High PoE 60W output, active PoE Injector
► Output voltage is rated, 55Vdc. With detection chip inside,
before powering, there has a detect process.
► 4KV surge protection on PoE port
► To protect indoor devices and inner components from surge damage,
we design 4KV (10/700μs) on PoE port.
► AC Port: 2KV(1.2/50us) surge protection
► Wide Working temperature -40℃ to 65℃
► LNK-PSE601G-SFP design industrial level working temperature -40℃
to 65℃, to meet harsh conditions requirements.
Technical Indexes
| Parameter | Specifications |
| Standard | IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-Tx Fast Ethernet
IEEE802.3ab 1000Base-T Gigabit Ethernet
Support terminal equipment with IEEE802.3af/at
RoHS Compliance
WEEE Compliance |
| Input & Output | Input : 100-240Vac 1.5A 50/60Hz
Output: 55VDC 1100mA
Power Pins: 4/5(+), 7/8(-) & 3/6(+),1/2(-)
Data Speed: 10/100/1000Mbps |
| Working Environment | Operating Temperature: -40℃ to 65℃
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters |
| AC Surge Protection | 1.0KV (5P/5N)
L-N 1.2/50 (8/20) Tr/Th us
2.0KV (5P/5N)
L-PE 1.2/50 (8/20) Tr/Th us
N -PE |
| PoE Surge Protection | Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 4KV
Differential mode surge protection (10/700us): 1.5KV |
| Mechanical Characteristics | Case: Metal |
| Color: Black |
| Mounting: Wall-mounted |
| IP Rated: IP20 |
| Size (LxWxH): 203mm X 130mm X 41mm |
| Weight: 910g |
| Safety Approvals | CE, FCC |
| EMI | FCC CFR47 Part 15, EN55024, EN55032 |
| EMS | IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
IEC61000-4-6(CS) 10V(150kHz~80MHz) |
| Immunity | IEC60068-2-6(Vibration)
IEC60068-2-27(Impact)
IEC60068-2-32(Free Fall) |
| LED Indicator | Power Indicator: Green
PoE Load Indicator: Green
SFP Fiber Indicator: Green
LAN Data Indicator: Yellow |
Overview
LNK-PSE601G-SFP is a single port PoE Injector with SFP fiber
connection port. It provides 55Vdc, 1.1A power for remote PDs over
full-4pairs output with 4KV (10/700us) surge protection. It
supports both 10/100Base-T and Gigabit device. It works for 60W PoE
PDs, such as wireless APs, base stations, high power cameras, door
locks, displays, POS, information kiosks and other high power
Ethernet terminals. It is also compatible and safe to use with any
IEEE802.3af/at, PoE++ compliant terminals. It works like a switch;
data is interoperable among LAN port, PoE port and SFP port.
LNK-PSE601G-SFP is designed for indoor use but can work outdoor by
covered with waterproof case. It works with 100-240Vac input and
operates under -40℃ to 65℃ full loading. It has detection chip
inside, which will detect and classify PD before powering it. It
will not provide power until a standard compliant PD is detected.
The effective distance is 100 meters over Cat5e/Cat6 cables. It is
especially suitable for working in complex power situations.
Ordering Information
| Model | Description |
| LNK-PSE601G-SFP | 60W SFP PoE Injector: 55Vdc/1.1A/1000Mbps/(4,5+,7,8-) and
(3,6+,1,2-)/Surge Protection/Active |
