Wall Mount Active PoE Injector 15.4W IEEE802.3af 30W Max
IEEE802.3at
Wall Mount Active PoE Injector
Wall Mount Active PoE Injector Advantages
► Compact wall mount design
► Up to 15.4W/30W of PoE Power
► Fully IEEE802.3af/IEEE802.3at compliant
► No additional power cables required
► Built in protection circuits
► Supports 10/100M or 10/100/1000M LAN environment
► Safe and Reliable Power to WLAN Access Points
► Automatic Detection and Protection of Non–standard Ethernet
Terminals
Technical Indexes
| Parameter | Specifications |
| Features | • Conforms to IEEE802.3af standard RJ-45 • Conforms to IEEE802.3af standard RJ-45 |
• Data Input Interface RJ-45 10/100Base-TX/ • Data Input Interface RJ-45 10/100/1000Base-TX |
| Data Rate | 10/100Mbps 10/100/1000Mbps |
| Input Power | 90-240V AC ,50-60Hz |
| Output Power | 15.4W Max IEEE802.3af 30W Max IEEE802.3at |
| Wiring | • Data provide over pairs 1/2(+) and 3/6(-) |
| • Power over spare pairs 4/5(+) and 7/8(-) |
| LED Display | YES |
| Operating Temperature | 0 to +40°C, |
| Humidity | Max. 95% RH(non-condensing) |
| Dimension (LxWxH) | 100×48×32mm |
| Weight | 120g |
Overview
LNK-POE200W/LNK-POE300W wall mount active PoE injector is
completely self-contained, a separate power supply and injector is
not required. Compliant with IEEE802.3 af/at Ethernet power supply
standard, it can be plugged directly into a wall electrical outlet,
eliminating the need for additional power cables. The compact size
makes it ideal for crowded equipment enclosures.
The wall mount active PoE injector feature built in over voltage,
over current and short circuit protection. If an overload is
detected, the power shuts down automatically; when the overload is
cleared, the power is restored.
It enables power current to travel on the Ethernet network cable,
thus eliminates the need to directly connect a power supply to the
wireless LAN device. Power and Data are combined on a single cable,
thus eliminating the need for extra power lines and also reducing
installation costs and manpower.
Ordering Information
| Model | Decription |
| LNK-POE200W | Wall Mount PoE Injector, 10/100Mbps, IEEE 802.3af 15.4W |
| LNK-POE200WT | Wall Mount PoE Injector, 10/100Mbps, IEEE 802.3at 30W |
| LNK-POE300W | Wall Mount PoE Injector, 10/100/1000Mbps, IEEE 802.3af 15.4W |
| LNK-POE300WT | Wall Mount PoE Injector, 10/100/1000Mbps, IEEE 802.3at 30W |
